-
This convenient adapter board allows users to install either a PCIe/104 or a PCI/104-Express card into a standard PCI Express system slot. The adapter features both a PCIe/104 and a PCI-104 connector. The passive PCI-104 connector has all critical PCI input signals tied off to safe levels to avoid damaging a dual-bus card, while at the same time provides extra mechanical stability for PCI/104-Express cards. Standard Usage This adapter supports any x1 lane PCI/104-Express or PCIe/104 add-in card. Simply mount the add-in card to the adapter and install the adapter in a PCI Express slot. Most PCI/104-Express and PCIe/104 cards will require the connection of an IDE power cable to the P3 connector on the card. This cable provides the 5V rail to the add-in card. Once everything is connected, you may begin using the add-in card just as you would any other PCI Express add-in card. No additional configuration is required. -
Connect Tech’s PCI/PCIe to PMC/XMC Adapter enables users to link a standard PCIe card to a XMC Carrier, or a standard PCI card to a PMC Carrier. The ADG052 is transparent to the PMC/XMC Carrier system and allows for communication, testing, and/or debugging of the Carrier. The ability to test both PCI and PCIe cards, without additional setup or software, enables easy PCI to PMC or PCIe to XMC design development. Standard Usage Guide For standard usage of the ADG052, simply insert into a PMC/XMC Carrier. Connect the desired PCI or PCIe cards into the Adapter. The LEDs on the Adapter serve a few purposes: D1: Busmode 1 D2: XMC GA2 D3: XMC GA1 D4: XMC GA0 D5: Busmode 4 D6: Busmode 3 D7: Busmode 2 For assembly, ensure that proper Electro Static Discharge (ESD) practices are followed. -
Connect Tech’s PCIe/104 Bus Extender can be used to allow one additional card height spacing between peripherals in a PCIe/104 or PCI/104-Express stack. The PCIe/104 Bus Extender can be used to allow the additional space required for objects such as heatsinks, I/O connectors, cables or other components that can cause clearance issues in your PCI/104-Express stack. -
Connect Tech’s Quad Mini PCIe/mSATA board supports up to four mini PCIe modules simultaneously for applications in the PCIe/104 small form factor embedded market place. This product is ideal for a wide array of applications. The ADG078 and ADG080 support any "Half" or "Full" Mini PCIe/mSATA product on the market, while the ADG087 supports any "Full" Mini PCIe/mSATA. This allows for maximum flexibility while keeping the PCIe/104 stack as small as possible. -
Connect Tech’s PCIe/104 to M.2 Adapter allows for the implementation of two M.2 next generation form factor expansion slots. Supported cards are, based on configuration, B, B&M, E, and A&E key type. -
Connect Tech's PCIe/104 to PCI Express Bottom Stacking adapter allows users to install any x1, x4, x8 or x16 lane PCI Express card into a PCIe/104 or PCI/104-Express stack down configuration. This convenient adapter board enables the testing and development for standard PCI Express cards in the PCIe/104 or PCI/104-Express environment. Standard Usage This adapter supports any x1, x4, x8 or x16 lane PCI Express add-in card. Simply mount the PCI Express stack to the adapter and install the PCI Express card into the slot. Once everything is connected, you may begin using the add-in card just as you would any other PCI/104-Express add-in card. No additional configuration is required. Click here to view a list of compatible CPU boards with this adapter. ***An ADG021 variant is now available to better support additional user configurations, specifically those who have one or more peripheral card installed between the SBC and adaptor. You may continue to use the ADG021 with all x1, x4, x8 and x16 PCIe cards, provided no PCIe/104 cards are inserted between the SBC and adaptor. For customers requiring one or more x1 PCIe/104 cards between the SBC and the PCIe/104 to PCIe adapter, but who are using ONLY x1 cards in the adaptor, the correct part number is ADG055. The ADG055 does not support x4, x8 or x16 PCIe cards except when they are able to function as an x1 card. Customers using PCIe/104 cards between the SBC and adaptor with only x4, x8 or x16 PCIe cards should continue to use the ADG021.*** -
Connect Tech's PCIe/104 to PCI Express Top Stacking adapter allows users to install any x1, x4, x8 or x16 lane PCI Express card into a PCIe/104 or PCI/104-Express stack up configuration. This convenient adapter board enables the testing and development for standard PCI Express cards in the PCIe/104 or PCI/104-Express environment. Standard Usage This adapter supports any x1, x4, x8 or x16 lane PCI Express add-in card. Simply mount the add-in card to the adapter and install the adapter on the top of a PCIe/104 or PCI/104-Express stack. Once everything is connected, you may begin using the add-in card just as you would any other PCI/104-Express add-in card. No additional configuration is required. Click here to view a list of compatible CPU boards with this adapter. -
Connect Tech’s PCIe/104 to PCI Express Cable Adapter provides an interface from the PCIe/104 (PCI/104-Express) bus to a PCI Express cable connection. The adapter is completely transparent to the PCI Express bus and allows the use of a PCI Express device outside of the PCI/104-Express system stack. -
Expand the capabilities of your PCIe/104 systems, by incorporating PCI-104 cards into your stack. Connect Tech’s PCIe/104 to PCI-104 Adapter enables users to add four PCI-104 compatible boards into either a stack up or stack down configuration. With a full PCIe/104 pass-through, the use of PCI/104 - Express cards is also possible. The Adapter also accesses the PCIe x1 Bank, leaving the x16 Bank open for more intensive operations. Standard Usage Guide For standard usage of the ADG054, simply insert into a host system’s PCIe/104 slot. Connect the desired PCI-104 or PCI/104-Express cards to the Adapter. Remember to set the unique ID for each of the selected cards and that no two boards share the same unique ID. The LEDs on the Adapter indicate three important things. Each of the three blue LEDs represent a power rail that is part of the PCIe/104 stack. The Red PWR LED displays that the on board PLX8112 chip is being properly powered. Finally, the Red LINK LED displays that the board has successfully connected on the PCIe Lane. For stack assembly, ensure that proper Electro Static Discharge (ESD) practices are followed. -
Connect Tech’s SUMIT to PCIe/104 Adapter allows for easy integration of PCIe/104 or PCI/104-Express cards into an existing SUMIT-104 system. The SUMIT to PCIe/104 Adapter is fully compatible with any Legacy Type-1 or Type-2 SUMIT-104 system, and allows x1 and x4 lane PCIe/104 or PCI/104-Express peripherals to be used with SUMIT cards in a SUMIT-104 stack. Additional signals available on the PCIe/104 bus include SMbus and 2 x USB. Additional accessible signals include 2 x USB ports via on-board Mini-USB connector (optional). -
Connect Tech’s XMC to PCIe/104 Adapter Board is an engineering tool for the purpose of enabling rapid development of systems requiring the use of next generation form factor peripheral cards. This adapter supports adding VITA 42 XMC cards to a Type 1 PCIe/104 system. -
Connect Tech’s Xtreme I/O Express ADC-DAC is an analog and digital peripheral board for the PCIe/104 small form factor embedded market place. This product is ideal for data acquisition, measurement and control applications. The Xtreme I/O Express ADC-DAC supports harsh environments with demanding conditions with an extended temperature range of -40°C to +85°C. -
Connect Tech's PCIe/104 serial cards offer advantages including rapid data transfer, high reliability and reduced system costs because of the stacking nature of the PC/104 form factor. Xtreme/104-Express Opto serial cards maximize ruggedness by adding 3 kV optical isolation to protect your industrial and embedded applications. Xtreme/104-Express Opto includes a fractional baud rate generator that matches almost any baud rate accurately. Additionally, Xtreme/104-Express Opto offers large 256 byte FIFO buffers, 9-bit data support, and is suitable for industrial temperature requirements (-40ºC to 85ºC). Connect Tech's PCIe/104 serial boards provide longevity for critical military, aerospace, medical, instrumentation and industrial control applications. -
Connect Tech’s PCIe/104 Qseven Carrier Board is a small embedded carrier board that allows complete integration with any industry standard Qseven module. This carrier board utilizes the PC/104 form factor with 4 x1 PCIe lanes, and the PCIe/104 bus. The on-board connectors enable connection to SATA, USB, Ethernet, LVDS Video, VGA Video, and RS-232 & RS-422/485. Easily upgrade to the latest processor and memory technology while maintaining the I/O interfaces.
The PCIe/104 Qseven Carrier Board is ideal for a broad range of embedded applications. -
Connect Tech’s COM Express® Type 6 104e is a compact carrier board which matches the dimensions of a COM Express® Basic module and offers the ultimate durability with rugged, locking pin header connectors. In addition to the option for multiple video display, on-board DisplayPort/HDMI/DVI switching, USB 3.0, dual GbE and swichable Mini-PCIe / mSATA ports a PCIe/104 Type 2 connector allows for even further 10 expansion. COM Express® Type 6 104e Carrier Board is ideal for space constrained applications, harsh environments, demanding conditions and supports extended temperature ranges of -40°C to +85°C.