Downloads support: SDG001, SDG002, SDG003, SDG004
Connect Tech’s SSD/104 SATA is a complete rugged stackable solid state drive (SSD) and storage solution that allows up to two mSATA SSD modules to be installed into any PC/104-Plus, PCI-104, PCI/104-Express and PCIe/104 stack or embedded system. SSD/104 SATA solid state drive (SSD) and storage solution improves performance, expands storage capacity and reduces overall storage footprint in an embedded system.
Designed with the latest generation of mSATA SSD modules, SSD/104 SATA solid state drive (SSD) and storage solution can be easily upgraded to accommodate future generations of mSATA modules for even greater system capacity and performance.
When combined with mSATA SSD modules, SSD/104 SATA solid state storage solution directly interfaces with the standard SATA bus, which can be used as a drop-in replacement for any SATA storage device. SSD/104 SATA can also be interfaced with any single board computer or embedded system using standard 7-pin SATA.
SSD/104 SATA is available as a complete storage solution with a preinstalled mSATA module, or as a separate mSATA carrier which supports any mSATA SSD module.
128GB, 16GB, 32GB, 4GB, 64GB, 8GB, Up to 256GB maximum using 2 mSATA modules or more with future generations of mSATA modules
SLC or MLC
+3.3V / 0.5A maximum, Low Power Consumption: 260mA (Active) / 130 mA (Idle), PCI-104 Bus, PCIe/104 Bus
Supports all SATA generations:
mSATA SSD Module: 2.000″ x 1.175″ (50.80mm x 29.85mm), JEDEC 300-MB Compliant, Mini PCIe Form Factor Compliant, SSD/104 Carrier: 3.550″ x 3.775″ (90.17mm x 95.89mm), PC/104 Compliant
3.5mm pitch Phoenix Type power connector, mSATA Connectors, PCI-104 or PCIe/104 stacking connectors (optional), Standard Right Angle 7-pin SATA data connectors
SATA signals from PCIe/104 or PCI/104-Express Type 2 SBC
Up to 2 mSATA SSD modules
Commercial: 0°C to +70°C (+32°F to +158°F), Industrial: -40°C to +85°C (-40°F to +185°F)
|SDG001||Full Build – Both PCIe./104 and PCI-104 Connectors are installed|
|SDG002||PCIe/104 Build – Only PCIe/104 Connector is installed|
|SDG003||PCI-104 Build – Only PCI-104 Connector is installed|
|SDG004||No bus connectors installed, external power must be used|
You may also like…
Allows any 2.5” SATA hard drive to be installed into any Type II PCIe/104 stack
Add four PCI-104 compatible boards into a stack up or stack down configuration
Based on the PCI bus and a compact form factor, provides maximum flexibility
Rugged SFF carrier offering PCIe/104 Type-1 or Type-2 expansion
Highest port density, with 12 ports on a PCI-104 card, 1kV optical isolation