Xtreme/10G Managed Ethernet Switch/Router

Software Features Available

What is the difference between WebStaX, SMBStaX and IStaX?

FeatureWebStaXSMBStaXIStaX
BSP and API Features
Internal CPU✔✔
✔
Port Control Features
Port speed/duplex mode/flow control✔✔✔
Per priority pause✔✔✔
Port frame size (jumbo frames)✔✔✔
Port state (administrative status)✔✔✔
Port status (link monitoring)✔✔✔
Port statistics (MIB counters)✔
✔✔
Port VeriPHY (cable diagnostics)✔✔
✔
PoE/PoE+—PD69208 support✔✔✔
PoE/PoE+ with LLDP✔✔✔
NPI port✔✔✔
PCIe ✔✔✔
Dual CPU (application variant with JSON)✔✔✔
On-the-fly SFP detection ✔✔✔
UDLD✔✔✔
QoS Features
Traffic classes (8 active priorities)✔✔✔
Port default priority✔✔✔
User priority✔✔✔
Input priority mapping ✔✔✔
QoS control list (QCL Mode)✔✔✔
Global storm control for UC, MC, and BC✔✔✔
Random early discard (RED)✔✔✔
Port policers ✔✔✔
Service policing including BW profile
Queue policers✔✔
Global/VCAP (ACL) policers✔✔✔
Port egress shaper ✔✔✔
Queue egress shapers✔✔✔
DiffServ (RFC2474) remarking✔✔
Tag remarking✔✔
Scheduler mode ✔✔✔
H-QoS scheduling
L2 Switching Features
Auto MAC address learning/ageing✔✔✔
MAC addresses static✔✔✔
Virtual LAN✔✔✔
VLAN translation
Private VLAN static✔✔✔
Port isolation static✔✔✔
MAC-based VLAN ✔✔
Protocol-based VLAN✔✔
IP subnet-based VLAN✔✔
VLAN trunking✔✔✔
GARP VLAN registration GVRP✔✔
Multiple registration protocol MRP✔✔
Multiple VLAN registration protocol MVRP ✔✔
IEEE-802.1ad provider bridge (native or translated
VLAN)		✔✔✔
EVC classification of L4 flows (SIP, SIP, IP protocol,
SPort, DPort)—CE
7-tuple EVC rules
E-ACCESS (EPL, EVPL)
E-LINE (EPL, EVPL)
E-LAN (EP-LAN, EVP-LAN)
E-TREE (EP-TREE, EVP-TREE)
L2CP tunneling
MSTP✔✔
Rapid spanning tree RSTP, STP✔✔✔
Loop guard✔✔✔
Link aggregation static✔✔✔
Link aggregation LACP✔✔✔
BPDU guard and restricted role✔✔
Error disable recovery✔✔
IGMPv2 snooping✔✔✔
IGMPv3 snooping✔✔
MLDv1 snooping✔✔
MLDv2 snooping✔✔
IGMP filtering profile✔✔
IPMC throttling, filtering, and leave proxy✔✔
MVR✔✔
MVR profile✔✔
Voice VLAN✔✔
DHCP snooping ✔✔
ARP inspection✔✔
Port mirroring✔✔✔
Flow mirroring✔✔
Rmirror✔✔
Protection Features
1:1 port protection—G.8031
1:N port protection—G.8031
G.8032 ring protection ✔
G.8032 ring protection version 2 ✔
L3 and Routing Features
DHCP option 82 relay✔✔
UPNP✔✔
Security Features
Port-based 802.1X✔✔✔
Single 802.1X✔✔
Multiple 802.1X✔✔
MAC-based authentication✔✔✔
VLAN assignment✔✔
QoS assignment✔✔
Guest VLAN✔✔
RADIUS authentication and authorization✔✔✔
RADIUS accounting✔✔
MAC address limit✔✔
IP MAC binding✔✔
IP/MAC binding dynamic to static✔✔
TACACS+ authentication and authorization✔✔
TACACS+ command authorization✔✔
TACACS+ accounting✔✔
Web and CLI authentication✔✔✔
Authorization (15 user levels)✔✔
ACLs for filtering/policing/port copy✔✔✔
IP source guard✔✔
Synchronization Features
SyncE with SSM
Microsemi one-step TC PHY solution✔
1588v2 PTP with two-step clock✔
1588v2 PTP with one-step clock ✔
Peer-to-peer transparent clock ✔
End-to-end transparent clock ✔
Boundary clock ✔
Redundant masters and multiple timing domains ✔
ITU filtering: only ZLS30380 network
synchronization algorithm		✔
PTP over IPv4 ✔
Unicast/multicast ✔
TC internal master/slave with PDV filtering and no
modulation or latency feedback from modems		✔
TC internal master/slave with reduced PDV
filtering and modem provides feedback on
modulation or latency: only ZLS30380 network
synchronization algorithm		✔
G.781-compliant clock selection algorithm for the
platform as a PTP slave: only ZLS30380 network
synchronization algorithm		✔
Combined SyncE and 1588: only ZLS30380 network
synchronization algorithm
MSCC servo algorithm integration✔
MSCC DPLL API integration✔
G.8265.1 BMCA: only ZLS30380 network
synchronization algorithm		✔
PTP profile: only ZLS30380 network
synchronization algorithm		✔
Clock quality: only ZLS30380 network
synchronization algorithm		✔
G.8275.1 BMCA: only ZLS30380 network
synchronization algorithm		✔
G.8275-compliant filter: only ZLS30380 network
synchronization algorithm		✔
PTP time interface✔
NTPv4 client✔✔
OAM and Test Features
Variable, request, and response
Discovery process and information. Event
notification and loopback.
Dying gasp
Dying gasp SNMP trap
Ingress/egress ✔
FM: continuity check and remote defect indication
(ETH-CC + ETH-RDI)		✔
FM: loopback (ETH-LB) ✔
FM: link trace (ETH-LT)✔
FM: CFM dynamic TLV✔
FM: alarm indication signal (ETH-AIS)✔
FM: locked signal (ETH-LCK) ✔
FM: test signal (ETH-Test)✔
FM: automatic protection switching (ETH-APS +
ETH-RAPS)		✔
PM: dual-ended frame loss measurement—CCMbased (ETH-LM)✔
PM: single-ended frame loss measurement
LMM/LMR-based (ETH-LM)		✔
PM: frame delay and delay variation measurement
(ETH-DM)		✔
EPS/ERPS using ETH-CCM ✔
OAM inject engine support✔
OAM inject engine support 2✔
Nested MEPs✔
Link state tracking✔
FM: link trace PDU (LTM) respond ✔
FM: loopback PDU (LBM) respond ✔
Subscriber MIP✔
Microsemi OAM Y.1731 PHY solution✔
Syslog for congestion fault management✔
RFC2544
RFC2544 LBM/LMR support
Advanced service activation measurements (SAM)
Y.1564
Single-ended measurement
SAM Y.1564 reflector support
SMAC/DMAC swap
Facility (NNI) TT data responder (loopback) in port
domain
Facility (NNI) TT data and TT OAM responder
(loopback) in EVC domain
Terminal (UNI) TT OAM responder (loopback) in
subscriber domain
Terminal (UNI) TT OAM responder (loopback) in
EVC domain
OAM HW engine✔
MEF 35 Phase 1 (performance monitoring)
MEF 35 Phase 2 (performance monitoring)
Robustness Features
Cold start✔✔✔
Cool start✔✔✔
Power Saving Features
ActiPHY✔✔✔
PerfectReach✔✔✔
EEE power management✔✔✔
LED power management✔✔✔
Thermal protection✔✔✔
Adaptive fan control✔✔✔
Customization Framework Features
Separate BSP and application✔✔✔
Allow customers to append or change a binary
image		✔✔✔
IPC JSON-RPC socket (with notification support)✔✔✔
Overwrite default startup configuration✔✔✔
Boot and initialization of third-party daemons✔✔✔
Configuration to disable certain build-in features✔✔✔
Management Features
JSON-RPC✔✔
JSON-RPC notifications✔✔
Double VLAN tag management
DHCP client✔✔✔
DHCPv6 client✔✔
DHCP server✔✔
DNS client and proxy✔✔
HTTP server✔✔✔
CLI: console port ✔✔✔
CLI: telnet✔✔
Industrial standard CLI ✔✔✔
Industrial standard configuration✔✔✔
Industrial standard CLI debug commands✔✔✔
Management access filtering✔✔✔
HTTPS✔✔✔
SSHv2 ✔✔
IPv6 management✔✔
IPv6 ready logo PHASE2✔✔
RFC4884 (ICMPv6)✔✔
System syslog✔✔✔
Software upload through web✔✔✔
SNMPv1/v2c/v3 agent
Note: No SNMPv1 trap support		✔✔✔
RMON (Groups 1, 2, 3, and 9) ✔✔
RMON alarm and event (CLI, web)✔✔
Alarm module✔✔
IEEE 802.1AB-2005 link layer discovery LLDP✔✔✔
TIA 1057 LLDP-MED✔✔
Cisco discovery filtering: CDP✔✔
sFlow✔✔
Configuration download/upload: industrial
standard		✔✔✔
Loop detection restore to default✔✔✔
Symbolic register access✔✔✔
Daylight saving✔✔
SD/MMC card slot support✔✔✔
Standard MIBs Features
RFC 2674 VLAN MIB✔✔
IEEE 802.1Q bridge MIB 2008✔✔
RFC 2819 RMON (Groups 1, 2. 3, and 9) ✔✔
RFC 1213 MIB II✔✔✔
RFC 1215 TRAPS MIB✔✔✔
RFC 4188 bridge MIB✔✔✔
RFC 4292 IP forwarding table MIB✔✔
RFC 4293 management information base for the
internet protocol (IP): IPv6 only for APPL-4.00 		✔✔
RFC 5519 multicast group membership discovery
MIB		✔✔
RFC 4668 RADIUS authorization client MIB✔✔
RFC 4670 RADIUS accounting MIB✔✔
RFC 3635 Ethernet-like MIB✔✔✔
RFC 2863 interface group MIB using SMI v2✔✔
RFC 3636 802.3 MAU MIB✔✔
RFC 4133 entity MIB version 3✔✔
RFC 4878 link OAM MIB✔
RFC 3411 SNMP management frameworks✔✔
RFC 3414 user-based security model for SNMPv4✔✔
RFC 3415 view-based access control model for
SNMP		✔✔
RFC 2613 SMON VLAN statistics✔
RFC 2613 SMON: PortCopy✔✔
IEEE 802.1 MSTP MIB✔✔✔
IEEE 802.1AB LLDP-MIB (LLDP MIB included in a
clause of the STD)		✔✔✔
IEEE 802.3ad (LACP MIB included in a clause of the
STD)		✔✔
IEEE 802.1X (PAE MIB included in a clause of the
STD)		✔✔
TIA 1057 LLDP-MED (MIB is part of the STD)✔✔
RFC 3621 LLDP-MED Power over Ethernet (PoE)
(No specific MIB for PoE+ exists)		✔✔✔
Private MIB framework✔✔
Phase 1 private MIB support✔✔
Full private MIB support✔✔