++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+	Board Support Package ReadMe for Connect Tech Nvidia Jetson TX1 Carriers
+	BSP Version:	V004	
+	Date:		2016/09/30		
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++	

================================================================================
			Introduction
================================================================================

	This Board Support Package adds support for Connect Tech Jetson TX1
	carrier boards to Linux4Tegra. It includes any extra files required
	to use all the features of the carriers.

	Please check the "Product Specific Details" section for what features
	for your board is supported with this BSP release and the "Changes"
	section for the changes made between versions.
	You can check which version of the BSP you have installed by running:

		cat /etc/CTI-L4T.version     

	Check for the Latest Version of the CTI-L4T BSP at:

	http://www.connecttech.com/sub/Products/ASG001.asp
  
    Please Note that this BSP is intended to be used with L4T Version 24.1 and 
    requires a 64-bit Root File System

================================================================================
			Installation
================================================================================

	1. Before Installing the BSP you should back up any important files you
	   may have on the 
	   system.  

	2. Extract the CTI-L4T-V### package into any directory via:

		tar -xzf CTI-L4T-V###

	  (replacing ### with your file name)

	3. Change into the CTI-L4T directory:
		
		cd ./CTI-L4T

	4. Run the install script (as root or sudo) to automatically install
	   the BSP files to the correct locations:

		sudo ./install.sh <Part Number>

	5.  The package is now installed, you can verify by running:
		
		cat /etc/CTI-L4T.version

	6. Restart the system so the changes will take effect.

================================================================================
			Product Specific Details
================================================================================
--------------------------------------------------------------------------------
				ASG001
--------------------------------------------------------------------------------

	-PWM Fan Support
    -CSI camera support (OV5693 only)i
	-Fix for TX1 HDMI driver to support Virtual Terminals (ex. alt+ctrl+F1) 
    -Support for USB only mPCIe cards (ex. Cell Modems)
	
--------------------------------------------------------------------------------
				ASG002
--------------------------------------------------------------------------------

	-PWM Fan Support
    -CSI0 camera support (OV5693 only)
    -CSI1 camera support (OV5693 only)
	-Fix for TX1 HDMI driver to support Virtual Terminals (ex. alt+ctrl+F1) 
    -Support for USB only mPCIe cards (ex. Cell Modems)
    
--------------------------------------------------------------------------------
				ASG003
--------------------------------------------------------------------------------

	-PWM Fan Support
	-Fix for TX1 HDMI driver to support Virtual Terminals (ex. alt+ctrl+F1) 

--------------------------------------------------------------------------------
				ESG501
--------------------------------------------------------------------------------
	
	-Fix for TX1 HDMI driver to support Virtual Terminals (ex. alt+ctrl+F1) 

================================================================================
				Changes
================================================================================

	Version 001, June 14, 2016
		-Initial BSP release, only PWM Fan Support so far
	Version 002, June 20, 2016
		-Added a custom extlinux.conf
		-Transistioned to CTI DTB files
	Version 003, July 12, 2016
        -Added CSI camera support for ASG001 and ASG002
        -Added part number to CTI-L4T.version
        -Fixed Virtual Terminals
    Version 004, Sept 30, 2016
        -Added Support for USB Only mPCIe cards 

 

================================================================================
			Contacting Connect Tech
================================================================================
 	If you have any problems, questions or suggestions regarding the
   	Board Support Package and hardware, please feel free to contact
	Connect Tech Inc.

   	Connect Tech can be reached in a variety of ways:

  		TEL:	1 519 836 1291 or 1-800-426-8979 in North America
   		FAX: 	1 519 836 4878
   		Email:
   			    Sales:      sales@connecttech.com

  			Tech Support:   support@connecttech.com

  		Web: 	http://www.connecttech.com

	Be sure to check the support section of our home page for answers to
   	technical questions at http://www.connecttech.com.
   	Also be sure to browse the knowledge data base.
	If you don't find what you are looking for, please contact the
	support department and let us know. We will be glad to help you.
================================================================================