-
Spec Sheet
Connect Tech's GMSL2 Plus camera platform allows up to 8 cameras to be connected to Connect Tech carriers, accelerated by the NVIDIA® Jetson AGX Orin™ and Jetson Thor™ T5000 modules. Power to the cameras is provided by PoC (Power over Coax) so all the data, control signals, and power are sent through a single 50 ohm coaxial cable. This allows for flexibility in cable routing and ease of installation in automotive applications. Short detection and overcurrent protection ensure a robust, production ready solution. The board is compatible with GMSL2 cameras up to 6Gbps. Each quad coax connector can be configured independently via software to set the channel modulation and tunnel/pixel mode. -
Spec Sheet
Connect Tech's GMSL3 camera platform allows up to 8 cameras to be connected to Connect Tech carriers, accelerated by the NVIDIA® Jetson AGX Orin™ and Jetson Thor™ T5000 modules. Power to the cameras is provided by PoC (Power over Coax) so all the data, control signals, and power are sent through a single 50 ohm coaxial cable. This allows for flexibility in cable routing and ease of installation in automotive applications. Short detection and overcurrent protection ensure a robust, production ready solution. The board is compatible with GMSL3 cameras up to 12Gbps using PAM4, as well as GMSL2 cameras up to 6Gbps. Each quad coax connector can be configured independently via software to set the channel modulation and tunnel/pixel mode. -
Spec Sheet
The Rogue-RX XP Carrier for Jetson AGX Orin™ is a full-featured carrier board designed for rugged and harsh environments with an extended power input.
Rogue-RX XP Carrier provides rugged positive locking high-speed connectors for 10GBASE-T, USB 3.2 Gen2 and HDMI. As well as a positive locking discrete wire/pin header for UART, RS-232, I2C, CAN & GPIO.
Rugged camera add-on expansion boards are available to connect directly with high-density MIPI CSI interfaces. -
Spec Sheet
The Connect Tech HDMI Camera platform allows for direct HDMI video input, converting to MIPI CSI2 for input to the NVIDIA Jetson. HDMI inputs include 2x micro HDMI and 2x KEL USL00-30L connectors, allowing for a wide variety of HDMI cameras and input sources.
-
Spec Sheet
Rogue-RX Carrier for Jetson AGX Orin™ is a full featured carrier board specifically designed for rugged and harsh environments. Rogue-RX Carrier for Jetson AGX Orin™ provides rugged positive locking high-speed connectors for 10GBASE-T, USB 3.2 Gen2 and HDMI, as well as a positive locking discrete wire/pin header for UART, I2C, SPI, CAN and GPIO.
Integrations with external storage and WiFi/Bluetooth via Intel 8265 are also available, contact [email protected] for more details. -
Spec Sheet
The NVIDIA® JETSON™ SDI VISION PLATFORM allows for ultra-low hardware latency SDI-to-MIPI CSI-2 conversion, providing a direct ISP ingest path to GPU compute on the NVIDIA® Jetson™ platform without the overhead from other methods such as frame grabbers, USB, or Ethernet packetizing.
Ideal for Edge AI applications in robotics, industrial and public sector, supporting multi-sensor, multi-spectral, electro-optic and infrared (EO/IR) surveillance and targeting systems for ISR and Inference applications across the air, land and maritime domains. -
Spec Sheet
Rogue Carrier for Jetson AGX Orin™ is a full-featured carrier board specifically designed for commercially deployable platforms. Rogue for Jetson AGX Orin™ provides access to an impressive list of latest generation interfaces on the Jetson AGX Orin™ and AGX Orin™ Industrial* while adding additional interfaces of 2x 10GbE, 3x USB 3.2, HDMI and a locking Mini-Fit Jr. power input connector. Integrations with external storage and WiFi/Bluetooth via Intel 8265 are also available, contact [email protected] for more details. *Jetson AGX Orin™ Industrial module is supported on Rev D or later on the AGX202 -
Spec Sheet
The JCB006 camera expansion board allows for the connection of FPD-Link III Deserializers to be connected to the Rogue or Rogue-X carriers. Power to the cameras is provided by PoC (Power over Coax) so all the data, control signals, and power are sent through a single 50 Ohm Coaxial cable. This allows for flexibility in cable routing and ease of installation in automotive applications. The main power for the board comes from the Camera Expansion Header. -
Spec Sheet
Connect Tech’s Leopard Imaging GMSL camera board is an expansion board that allows up to 8 Leopard Imaging GMSL cameras to be connected to the Jetson AGX Xavier module. The JCB002 interfaces with GMSL2 protocols. Power to the cameras is provided by PoC (Power over Coax) so all the data, control signals, and power are sent through a single 50 Ohm Coaxial cable. This allows for flexibility in cable routing and ease of installation in automotive applications. The main power for the board comes from the Camera Expansion Header at +12V. The 12V power for the cameras is also available from the same header on the Rogue carrier. NVIDIA’s development kit does not provide voltage here, so a hot pluggable external +9V to +24V connector is available on the JCB002. The circuit will always take the external voltage if both are connected. -
Spec Sheet
Connect Tech’s e-con GMSL camera board is an expansion board that allows up to 8 e-con systems GMSL cameras to be connected to the Jetson AGX Xavier™ or the Jetson AGX Xavier™ module. The JCB002 interfaces with GMSL2 protocols. Power to the cameras is provided by PoC (Power over Coax) so all the data, control signals, and power are sent through a single 50 Ohm Coaxial cable. This allows for flexibility in cable routing and ease of installation in automotive applications. The main power for the board comes from the Camera Expansion Header at +12V. The 12V power for the cameras is also available from the same header on the Rogue carrier. NVIDIA’s development kit does not provide voltage here, so a hot pluggable external +9V to +24V connector is available on the JCB002. The circuit will always take the external voltage if both are connected. -
Spec Sheet
The Allied Vision MIPI Camera Board is the vision solution that Jetson AGX Xavier project developers have been wishing for. Empowering rapid integration of your chosen cameras, this Camera Board allows for direct attachment of up to six MIPI sensors without the need of additional hardware components. Designed specifically to integrate up to six Allied Vision Alvium 1500 C and 1800 C sensors, this Camera Board comes supplied with all device-tree software necessary to integrate the cameras into your application - no further software development required. With seamless integration to the Connect Tech Rogue and Rogue-X Carrier Boards, users are able to transition from development to production without additional application development. Users have the option of integrating either 6x 2-lane or 4x 4-lane MIPI CSI-2 cameras from the Allied Vision Alvium 1500 C and 1800 C camera series. Browse Allied Vision Alvium 1500 C Camera Series - Click Here Browse Allied Vision Alvium 1800 C Camera Series - Click Here Additional Board Features- Suitable for Industrial Applications with extended temperature range of -40°C to +85°C (-40°F to +185°F)
- Can source +12V power from the Camera Expansion header on the Rogue and Rogue-X Carriers
-
Spec Sheet
The Allied Vision MIPI Camera Board is the vision solution that Jetson AGX Xavier project developers have been wishing for. Empowering rapid integration of your chosen cameras, this Camera Board allows for direct attachment of up to six MIPI sensors without the need of additional hardware components. Designed specifically to integrate up to six Allied Vision Alvium 1500 C and 1800 C sensors, this Camera Board comes supplied with all device-tree software necessary to integrate the cameras into your application - no further software development required. With seamless integration to the Connect Tech Rogue and Rogue-X Carrier Boards, users are able to transition from development to production without additional application development. Users have the option of integrating either 6x 2-lane or 4x 4-lane MIPI CSI-2 cameras from the Allied Vision Alvium 1500 C and 1800 C camera series. Browse Allied Vision Alvium 1500 C Camera Series - Click Here Browse Allied Vision Alvium 1800 C Camera Series - Click Here Additional Board Features- Suitable for Industrial Applications with extended temperature range of -40°C to +85°C (-40°F to +185°F)
- Can source +12V power from the Camera Expansion header on the Rogue and Rogue-X Carriers
-
Spec Sheet
Connect Tech’s GMSL camera platform is an expansion board that allows up to 8 cameras to be connected to the Jetson AGX Orin module. Since many different types of GMSL cameras are available, the JCB002 has user selectable options to interface with either GMSL1 or GMSL2 protocols at different operating frequencies. Power to the cameras is provided by PoC (Power over Coax) so all the data, control signals, and power are sent through a single 50 Ohm Coaxial cable. This allows for flexibility in cable routing and ease of installation in automotive applications. The main power for the board comes from the Camera Expansion Header at +12V. The 12V power for the cameras is also available from the same header on the Rogue carrier line of products. NVIDIA’s development kit does not provide voltage here, so a hot pluggable external +9V to +24V connector is available on the JCB002. The circuit will always take the external voltage if both are connected. -
Spec Sheet
Connect Tech’s e-con GMSL camera board is an expansion board that allows up to 8 Allied Vision GMSL cameras to be connected to the Jetson AGX Xavier™ or the Jetson AGX Xavier™ module. The JCB002 interfaces with GMSL2 protocols. Power to the cameras is provided by PoC (Power over Coax) so all the data, control signals, and power are sent through a single 50 Ohm Coaxial cable. This allows for flexibility in cable routing and ease of installation in automotive applications. The main power for the board comes from the Camera Expansion Header at +12V. The 12V power for the cameras is also available from the same header on the Rogue carrier. NVIDIA’s development kit does not provide voltage here, so a hot pluggable external +9V to +24V connector is available on the JCB002. The circuit will always take the external voltage if both are connected. -
Spec Sheet
Connect Tech’s Intel® RealSense™ GMSL camera board is an expansion board that allows up to 8 Intel® RealSense™ GMSL cameras to be connected to the Jetson AGX Xavier™ and Jetson AGX Orin™ modules. The JCB002 interfaces with GMSL2 protocols. Power to the cameras is provided by PoC (Power over Coax) so all the data, control signals, and power are sent through a single 50 Ohm Coaxial cable. This allows for flexibility in cable routing and ease of installation in automotive applications. The main power for the board comes from the Camera Expansion Header at +12V. The 12V power for the cameras is also available from the same header on the Rogue carrier. NVIDIA’s development kit does not provide voltage here, so a hot pluggable external +9V to +24V connector is available on the JCB002. The circuit will always take the external voltage if both are connected. -
Spec Sheet
The Allied Vision FPD-Link III Camera Board allows for the connection of FPD-Link III Deserializers to be connected to the Rogue, Rogue-X, and Forge carriers. Power to the cameras is provided by PoC (Power over Coax) so all the data, control signals, and power are sent through a single 50 Ohm Coaxial cable. This allows for flexibility in cable routing and ease of installation in automotive applications. The main power for the board comes from the Camera Expansion Header. -
Spec Sheet
The Imaging Source FPD-Link III Camera Board allows for the connection of FPD-Link III Deserializers to be connected to the Rogue, Rogue-X, and Forge carriers. Power to the cameras is provided by PoC (Power over Coax) so all the data, control signals, and power are sent through a single 50 Ohm Coaxial cable. This allows for flexibility in cable routing and ease of installation in automotive applications. The main power for the board comes from the Camera Expansion Header.
