Xtreme/PSU-XP Power Supply

  • Input Voltage Range: +6V to +36V DC
  • Total Output Power: 154W
  • Output Voltages: [email protected] A, +5V @ 10A, +12V @ 5A, -12V @ 0.5A, +5V-Standby @ 1A
  • Operating Temperature: -40°C to +85°C (-40°F to 185°F)
  • Fully meets the PC/104 component height requirements
    • No extra stacking extenders needed
    • Other PC/104 boards can be stacked directly on top or below the Xtreme/PSG
  • Uses latest generation highest efficiency power controllers, inductors, and MOSFETs
  • Oversized MOSFETs for improved thermal performance (No Heat sinking needed)
  • Various Connector Options: 2-piece terminal header/plug (standard), shrouded screw locking (optional)
Part #: PSG007, PSG008, PSG009, PSG010, PSG011, PSG012 Category:

More Information

Connect Tech’s Xtreme/PSU-XP is a high efficiency, high powered PC/104 form factor power supply with extended temperature capabilities. Xtreme/PSU-XP provides power to terminal block connectors and powers all of the PC/104 family expansion buses such as PC/104, PC/104-Plus, PCI-104, PCI/104-Express and PCIe/104.

Xtreme/PSU-XP is a highly reliable power supply which provides 154W of total output power with +3.3V, +5V, +12V, -12V and +5V-Standby output voltages. It can be used as a stand-alone power supply to power any other embedded system, or used directly to power any PC/104 stack or single board computer (SBC).

The Xtreme/PSU-XP has a wide input voltage range that accepts +6V to +36V DC and is specifically designed for use in a broad range of rugged applications including military, industrial, and air and ground vehicles.

Xtreme/PSU-XP can be used in combination with Connect Tech’s stackable CPU and expansion boards for a total design solution.

Xtreme/PSU-XP Power Supply Build Options

Connect Tech’s Xtreme/PSU product family includes the following part numbers and build options:

  • PSG007: PC/104-Plus (PCI & ISA)
  • PSG008: PC/104 (ISA Only)
  • PSG009: PCI-104 (PCI Only)
  • PSG010: PCIe/104 (PCI Express Only)
  • PSG011: PCI/104-Express (PCI Express & PCI)
  • PSG012: Embedded (No Bus Connectors)

Specifications

Dimensions

PC/104 Compliant

Bus Expansion Options

PSG007: PC/104-Plus (PCI & ISA), PSG008: PC/104 (ISA Only), PSG009: PCI-104 (PCI Only), PSG0010: PCIe/104 (PCI Express Only), PSG0011: PCI/104-Express (PCI Express & PCI), PSG0012: Embedded (No Bus Connectors)

Power Requirements

+6V to +36V DC Input

Input Protection

Reverse polarity protection, transient voltage suppression and series fuse

Power Consumption

154W

+3.3V Output

10A maximum continuous for full -40 to +85 range

+5V Output

10A maximum continuous for full -40 to +85 range

-12V Output

0.5A maximum continuous for full -40 to +85 range

+5V Standby

1A maximum continuous for full -40 to +85 range

Output Regulation

Less than 1%

Output Protection

Overload protection and transient voltage suppression

Output Efficiency

Up to 93%

Operating Temperature

-40°C to +85°C (-40°F to +185°F)

Connectors

Output: 3.5mm pitch standard terminal block header and mating plug

Downloads for Xtreme/PSU-XP Power Supply – PSG007

Downloads support: PSG007, PSG008, PSG009, PSG010, PSG011, PSG012

Ordering Information

Main Products
Part Number Description
PSG007 PC/104-Plus Build
– +5V @ 10A, +3.3V @10A,+12V @ 5A, -12V @0.5A, +5VSB @ 1A
– +5V, +3.3V, +12V and -12V connected to PC/104 and PCI-104 Bus connectors
PSG008 PC/104 Build
– +5V @ 10A, +3.3V @10A,+12V @ 5A, -12V @0.5A, +5VSB @ 1A
– +5V, +3.3V, +12V and -12V connected to PC/104 Bus connector.
PSG009 PCI-104 Build
– +5V @ 10A, +3.3V @10A,+12V @ 5A, -12V @0.5A, +5VSB @ 1A
– +5V, +3.3V, +12V and -12V connected to PCI-104 Bus connector.
PSG010 PCIe/104 Build
– +5V @ 10A, +3.3V @10A,+12V @ 5A, -12V @0.5A, +5VSB @ 1A
– +5V, +3.3V, +12V, +5VSB connected to the PCIe/104 bus connector.
– Additional ATX Functionality
PSG011 PCI/104-Express Build
– +5V @ 10A, +3.3V @10A,+12V @ 5A, -12V @1A, +5VSB @ 1A
– +5V, +3.3V, +12V, +5VSB connected to the PCI-104 & PCIe/104 bus connectors.
– Additional ATX Functionality
PSG012 Embedded Build
– +5V @ 10A, +3.3V @10A,+12V @ 5A, -12V @0.5A, +5VSB @ 1A
– No bus connectors installed

Custom Design

Looking for a customized power supply? Click here to tell us what you need.

You may also like…

Go to Top