Title: Configuring a PCI/104 or PC/104-Plus card for an Embedded Stack
Keywords: PCI/104, PCI/104-Plus, Xtreme/104-Plus, Comsync/PCI-104, CANpro/104-Plus, FreeForm/PCI-104, PC/104-Plus to MiniPCI Adapter, PCI ID
Date: November 17, 2009
KDB: KDB-319
Revision: 0.00
Author: RAC
Distribution: External
On the PCI-104 bus, each card within the stack must have a unique Id ranging from zero to three. On Connect Tech PCI/104 and PC/104-Plus cards, you will be required to set a rotary switch or pair of jumpers to specify where your card is located in the stack. (Ensure no two boards share an ID number)
The ID is dependent on the location of the card’s location in the system stack. The board should be at ID 0 if directly above the CPU, ID 1 if it is the second card, ID 2 if it is the third etc. This is more clearly outlined in the table below:
For additional support regarding configuring your PCI/104 or PC/104-Plus card, please contact [email protected]
End of KDB-319