Xtreme I/O Opto

  • Inputs: Selectable interrupt generation on any input signal (change of state, rising or falling edge) with 1.8kOhm current limiting series resistor on each input, and wide input voltage range from +0 up to +40V DC
  • Outputs: Individual selectable output voltage levels with a 4.7kOhm pull up, with maximum output current of 8mA, and wide input voltage range from +0 up to +40V DC
  • Flexibility: FPGA Register Controlled Device (jumpers are not required)
  • Optical Isolation: 3kV RMS
Part #: DAG001, DAG002 Categories: , Tags: , ,

More Information

Connect Tech’s Xtreme I/O Opto is a 48-bit isolated PCI-104 Digital I/O board grouped with 24 optically isolated inputs and 24 optically isolated outputs. The flexibility of the FPGA technology allows integration and customization to meet application requirements.

Fully PCI-104 compliant, Xtreme I/O Opto Digital I/O can be controlled directly from a memory mapped register set in any operating system.

The reliability of the Xtreme I/O Opto, along with the added protection provided by 3kV isolation on the Digital I/O ensures optimal performance and protection under extreme environmental conditions. Xtreme I/O Opto is ideal for PC/104 and other embedded technology applications in the military, aerospace, medical and industrial sectors.

Specifications

Inputs

• 24 optically isolated inputs (24-bits)
• Wide input voltage range from +0 up to +40V DC
• Independent grounds and reverse voltage protection
• Selectable interrupt generation on any input signal (change of state, rising or falling edge)
• 1.8kOhm current limiting series resistor on each input

Outputs

• 24 optically isolated outputs (24-bits)
• Wide output voltage range from +0 up to +40V DC
• Open collector configuration with common emitters
• Individual selectable output voltage levels with a 4.7kOhm pull up
• Maximum output current: 8mA

Connectors

2×25 (50 position) 0.1” (DIL) pin headers available in vertical or right angle

Optical Isolation

3kV RMS

Control/Addressing

• FPGA Register Controlled Device (No jumpers needed)
• Custom logic available upon request

Operating Temperature

-40°C to +85°C (-40°F to +185°F)

Dimensions

PC/104 Compliant

Bus

ISA (PC/104) connector can be optionally installed as a pass-through connector, PCI-104 (PCI) option

Software Compatibility

• Custom CTI Device Drivers for QNX, Linux, Windows
• Device can also be controlled directly from a memory mapped register set in any operating system

Additional Product Numbers

DAG001, DAG002

Downloads for Xtreme I/O Opto – DAG001, DAG002

Drivers for Xtreme I/O Opto & Xtreme I/O Express ADC-DAC

Operating System Driver Information Resources
Windows 10, Windows 8, Windows 8 64-bit, Windows 7, Windows Embedded Standard 7, Windows 7 64-bit, Windows XP, Windows XP Embedded, Windows XP 64-Bit Name: winufd-v112.zip
Version: 1.12
Released: 02.08.2017
Download Driver
Install Guide
Linux Name: ctifpga_v014.zip
Version: 014
Released: 02.08.2017
Request Driver

Install Guide

QNX 6 (Neutrino) Name: ufd-qnx-install-101.tar.gz
Version: 1.01
Released: 03.31.2014
Download Driver

OS: QNX 6 (Neutrino)
Name: ufd-qnx-install-101.tar.gz
Version: 1.01
Released: 03.31.2014
Status: Production/Stable

OS: Linux 2.6
Name: linufd-v005.zip
Version: 005
Released: 11.05.2012
Status: Production/Stable
Available Upon Request

OS: Windows XP, Windows 7, Windows XP Embedded, Windows Embedded Standard 7, Windows XP 64-Bit, Windows 7 64-bit, Windows 8, Windows 8 64-bit, Windows 10
Name: winufd-v111.zip
Version: 1.11
Released: 01.02.2016
Status: Production/Stable

Drivers support:
Xtreme I/O Express: DAG103, DAG104, DAG106
Xtreme I/O Opto: DAG001, DAG002

Ordering Information

Main Products
Part Number Description
DAG001 Xtreme I/O Opto, PCI-104
DAG002 Xtreme I/O Opto, PC/104-Plus

Custom Design

Looking for a customized FPGA product? Click here to tell us what you need.

You may also like…

Go to Top