Xtreme/104 Opto – PC/104 Serial

  • Flexibility: Two or four RS-232 or RS-422/485 serial ports
  • Protection: Ports are individually optically isolated at 3.0 kV AC* (most models) peak to peak
  • Speed: Data rates up to 460.8 Kbps
  • Performance: Ports controlled by a high performance dual UART, which is backward compatible with standard 16450 and 16550 UARTs.
  • Adaptability: Support for three RS-485 modes: full duplex, half duplex and multi-drop
Part #: 1040290200, 1040290201, 1040290220, 1040290221, 1040490200, 1040490201, 1040490220, 1040490221, XTG290200, XTG290201, XTG490200, XTG490201, XTG490220, XTG490221 Categories: , Tags: , ,

More Information

Compact yet powerful, the Xtreme/104 Opto PC/104 serial card performs where others fail. Durable and stackable, Xtreme/104 Opto’s small PC/104 form factor makes it the ideal serial communications link in today’s demanding embedded systems.

Xtreme/104 Opto offers 3 kV optical isolation on all signals and ports to ensure smooth, error-free transmission of data even in the noisiest environments. With the added feature of industrial temperature range operation, this PC/104 serial card is well suited to any embedded computer system that is exposed to harsh conditions.

Based on the 16C2850 UART with 128 byte transmit and receive FIFO buffers, Xtreme/104 Opto provides rapid data communications for your military, aerospace, medical, transportation and industrial automation applications.

Specifications

Ports

2 or 4 ports

Electrical Interfaces

Each port is jumper selectable, RS-232, RS-422/485

Connectors

10-pin header connectors

Control Signals

RS-232: TxD, RxD, RTS, CTS, RS-422/485: TxD+/-, RxD+/-, RTS+/-, CTS+/-

Baud Rate

RS-232: 50 bps – 230.4 Kbps, RS-422/485: 50 bps – 460.8 Kbps

Interrupts

Jumper selectable for IRQs 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 14, 15

I/O Addresses

Eight pre-defined sets of I/O addresses are jumper selectable

Dimensions

96mm x 104.1mm x 11.2mm (3.77" x 4.09" x 0.44")

Operating Temperature

-40°C to +85°C (-40°F to +185°F), 0°C to +70°C (+32°F to +158°F)

Storage Temperature

-40°C to +150°C (-40°F to +302°F)

Humidity

95% non-condensing

Bus

ISA bus compatible, 16-bit PC/104 connector

Operating System

DOS, Linux, QNX, SCO Unix, Solaris, VxWorks, Windows

Optical Isolation

Each port is isolated up to 3 kV AC peak, 3.0 kV DC and 2.1 kV AC
RMS on all signals

System Interfaces

One available PC/104 module stack connector

Power Requirements

+5V DC @ 260mA (typ)

Downloads for Xtreme/104 Opto – 1040290200

Downloads support: 1040290200, 1040290201, 1040290220, 1040290221, 1040490200, 1040490201, 1040490220, 1040490221, XTG290200, XTG290201, XTG490200, XTG490201, XTG490220, XTG490221

Drivers for Xtreme/104

Operating System Driver Information Resources
Windows 10, Windows 8, Windows 8 64-bit, Windows 7, Windows 7 64-Bit, Windows Vista, Windows Server 2008 64-Bit, Windows Server 2003, Windows XP, Windows XP Embedded, Windows 2000 Name: XT-WIN_2016.zip
Version: 2.0.1.6
Released: 02.26.2013
Download Driver
Install Guide (XP+)
Install Guide (2000)
Install Guide (XP+)
Install Guide (XP Embedded)
Windows 95/98/Me Name: EC-98_149.zip
Version: 1.49
Released: 09.22.2005
Download Driver
Install Guide
Windows CE 6.0, Windows CE .NET, Windows CE 3.0 Name: DF-CE_102.zip
Version: 1.02
Released: 11.20.2002
Download Driver
Install Guide (CE 6.0)
Install Guide (CE 3.0/CE.NET)
Windows NT Name: Standard Serial Driver
Version: n/a
Released: n/a
Driver Provided with OS
Install Guide
Linux (3.9.x +) Name: cti_serial_144.tgz
Version: 1.44
Released: 06.23.2020
Request Driver
Install Guide
Linux (2.6.39, 3.8.x) Name: cti_serial_125a.tgz
Version: 1.25
Released: 08.11.2014
Request Driver
Install Guide
Linux (2.6.18 to 2.6.38) Name: cti_serial_113a-2.6.38.tgz
Version: 1.13a-2.6.38
Released: 08.11.2014
Request Driver
Install Guide
Linux 2.4 Name: ctix-24-1.00.tar.gz
Version: 1.00
Released: 10.11.2007
Download Driver
Install Guide
QNX 6 (Neutrino) Name: Standard Serial Driver
Version: n/a
Released: n/a
Driver provided with OS
Install Guide
QNX 4 Name: DF-Q4_425e.tar
Version: 14.25e
Released: 03.17.2003
Download Driver
Install Guide
QNX 2 Name: Standard Serial Driver
Version: n/a
Released: n/a
Driver provided with OS
Installation guide not available
Solaris 8 Name: Standard Serial Driver
Version: n/a
Released: n/a
Driver provided with OS
Install Guide
DOS Name: DF-DOS_105.zip
Version: 1.05
Released: 08.19.1996
Download Driver
Installation guide not available
SCO Unix/Openserver Name: DF-SCO_220.tar
Version: 2.20
Released: 10.07.1999
Download Driver
Install Guide
VxWorks Name: CTI_SIO_2_0_3_0.zip
Version: 2.0.3.0
Released: 09.09.2005
Request Driver
Install Guide

Drivers support:

Xtreme/104: 1040490000, 1040490001, 1040490020, 1040490021, 1040890000, 1040890001, 1040890020, 1040890021, XTG490000, XTG490001, XTG490020, XTG490021, XTG890000, XTG890001, XTG890020, XTG890021

Xtreme/104 RS-232: 1040400000, 1040400001, 1040800000, 1040800001, 1040800020, 1040800021, XTG400000, XTG400001, XTG800001, XTG800020, XTG800021

Xtreme/104 Opto: 1040290200, 1040290201, 1040290220, 1040290221, 1040490200, 1040490201, 1040490220, 1040490221, XTG290200, XTG290201, XTG490200, XTG490201, XTG490220, XTG490221

Xtreme/104 Isolated: XT007-01

Comparison Chart

Part Number Ports Cables Features
1040290200 2 ports No Cable This Xtreme/104 Opto offers jumper-selectable electrical interfaces for each port (either RS-232 or RS-422/485), and provides 3.0 kV AC peak to peak Optical Isolation on all ports.
1040290201 2 ports CAB104 This Xtreme/104 Opto offers jumper-selectable electrical interfaces for each port (either RS-232 or RS-422/485), and provides 3.0 kV AC peak to peak Optical Isolation on all ports, and also includes a custom maximum baud rate of 500000 bps.
1040290220 2 ports No Cable This Xtreme/104 Opto offers jumper-selectable electrical interfaces for each port (either RS-232 or RS-422/485), and provides 3.0 kV AC peak to peak Optical Isolation on all ports, and also provides extended temperature protection, with operating ranges between -40°C to +85°C
1040290221 2 ports CAB104 This Xtreme/104 Opto offers jumper-selectable electrical interfaces for each port (either RS-232 or RS-422/485), and provides 3.0 kV AC peak to peak Optical Isolation on all ports, and also provides extended temperature protection, with operating ranges between -40°C to +85°C.
1040490200 4 ports No Cable This Xtreme/104 Opto offers jumper-selectable electrical interfaces for each port (either RS-232 or RS-422/485), and provides 3.0 kV AC peak to peak Optical Isolation on all ports.
1040490201 4 ports CAB104 This Xtreme/104 Opto offers jumper-selectable electrical interfaces for each port (either RS-232 or RS-422/485), and provides 3.0 kV AC peak to peak Optical Isolation on all ports.
1040490220 4 ports No Cable This Xtreme/104 Opto offers jumper-selectable electrical interfaces for each port (either RS-232 or RS-422/485), and provides 3.0 kV AC peak to peak Optical Isolation on all ports, and also provides extended temperature protection with operating ranges between -40°C to +85°C.
1040490221 4 ports CAB104 This Xtreme/104 Opto offers jumper-selectable electrical interfaces for each port (either RS-232 or RS-422/485), and provides 3.0 kV AC peak to peak Optical Isolation on all ports, and also provides extended temperature protection with operating ranges between -40°C to +85°C.
XTG290200 2 ports No Cable This Xtreme/104 Opto offers jumper-selectable electrical inerfaces for each port (either RS-232 or RS-422/485), and provides 3.0 kV AC peak to peak Optical Isolation on all ports. RoHS compliant.
XTG290201 2 ports CAG104 This Xtreme/104 offers jumper-selectable electrical interfaces for each port (either RS-232 or RS-422/485), and provides 3.0 kV AC peak to peak optical isolation on all ports. RoHS compliant.
XTG490200 4 ports No Cable This Xtreme/104 Opto offers jumper-selectable electrical interfaces for each port (either RS-232 or RS-422/485), and provides 3.0 kV peak to peak Optical Isolation on all ports. RoHS compliant.
XTG490201 4 ports CAG104 This Xtreme/104 Opto offers jumper-selectable electrical interfaces for each port (either RS-232 or RS-422/485), and provides 3.0 kV peak to peak Optical Isolation on all ports. RoHS compliant.
XTG490220 4 ports No Cable This Xtreme/104 Opto offers jumper-selectable electrical interfaces for each port (either RS-232 or RS-422/485), and provides 3.0 kV peak to peak Optical Isolation on all ports, and also provides extended temperature ranges between -40°C to +85°C. RoHS compliant.
XTG490221 4 ports CAG104 This Xtreme/104 Opto offers jumper-selectable electrical interfaces for each port (either RS-232 or RS-422/485), and provides 3.0 kV peak to peak Optical Isolation on all ports, and also provides extended temperature protection with operating ranges between -40°C to +85°C. RoHS compliant.

Ordering Information

Main Products
Part Number Description
1040290200 Xtreme/104, 2 ports
1040290201 Xtreme/104, 2 ports with CAB104 cable
1040290220 Xtreme/104, 2 ports with extended temperature of -40°C to +85°C
1040290221 Xtreme/104, 2 ports with extended temperature of -40°C to +85°C and CAB104 cable
1040490200 Xtreme/104, 4 ports
1040490201 Xtreme/104, 4 ports with CAB104 cable
1040490220 Xtreme/104, 4 ports with extended temperature of -40°C to +85°C
1040490221 Xtreme/104, 4 ports with extended temperature of -40°C to +85°C and CAB104 cable
XTG290200 Xtreme/104, 2 ports and RoHS Compliant
XTG290201 Xtreme/104, 2 ports and RoHS Compliant with CAG104 cable
XTG490200 Xtreme/104, 4 ports and RoHS Compliant
XTG490201 Xtreme/104, 4 ports and RoHS Compliant with CAG104 cable
XTG490220 Xtreme/104, 4 ports with extended temperature of -40°C to +85°C and RoHS Compliant
XTG490221 Xtreme/104, 4 ports with extended temperature of -40°C to +85°C, RoHS Compliant with CAG104 cable
Cables/Accessories
Part Number Description
CAB104 1x DB-9 Male, 10-Pin Header
CAG104 1x DB-9 Male, 10-Pin Header, RoHS Compliant

Custom Design

Looking for a customized PC/104 product? Click here to tell us what you need.

You may also like…

Go to Top