Looking for a customized NVIDIA® Jetson Orin™ Product? Click here to tell us what you need.
GMSL3 Camera Platform for NVIDIA® Jetson AGX Orin™ & Jetson Thor™ T5000
More Information
Connect Tech’s GMSL3 camera platform allows up to 8 cameras to be connected to Connect Tech carriers, accelerated by the NVIDIA® Jetson AGX Orin™ and Jetson Thor™ T5000 modules. Power to the cameras is provided by PoC (Power over Coax) so all the data, control signals, and power are sent through a single 50 ohm coaxial cable. This allows for flexibility in cable routing and ease of installation in automotive applications.
Short detection and overcurrent protection ensure a robust, production ready solution. The board is compatible with GMSL3 cameras up to 12Gbps using PAM4, as well as GMSL2 cameras up to 6Gbps. Each quad coax connector can be configured independently via software to set the channel modulation and tunnel/pixel mode.
Specifications
| Size | 75 mm x 57 mm (2.95” x 2.24”) |
|---|---|
| Weight | 45 g (1.59 oz) |
| NVIDIA Jetson Connection (Uplink) | 1x High Density Connector – Camera Board will mate to the Connect Tech “Camera Expansion Header” |
| GMSL Camera Inputs | 8x Total (GMSL3/GMSL2) – 2x per Deserializer |
| Deserializer | Maxim MAX96792A |
| MIPI Output | A single 4-lane MIPI CSI-2 v1.3 output from each Deserializer (16-lanes total) |
| Camera Input Connectors | 2x MATE-AX Quad Coax Connectors |
| PoC (Power-Over-COAX) | All 8 cameras will be sourced Power-Over-COAX from JCB009 |
| PoC Monitor | Ability to monitor the voltage and current used by the PoC connection |
| Short Protection and Detection | Ability to detect a short and protect against short-to-battery, short-to-ground and overcurrent conditions by use of the Maxim MAX20087 |
| Triggering | A shared PWM trigger is routed to MFP7 on all deserializers. |
| GMSL Mode Selection | Ability to configure and save the GMSL mode through software accessible GPIO allowing the configuration of the Deserializer to use different modes by use of the DS4520 memory backed I2C GPIO device |
| Power | Can be directly powered from Camera Expansion Header or External +12V Input |
| Operating Temperature | -40°C to +85°C (-40°F to +185°F) |
| Warranty and Support | 1 Year Warranty and Free Support |
Downloads
Jetson AGX Orin
Ordering Information
| Main Products | |
|---|---|
| Part Number | Description |
| JCB009 | Jetson AGX Orin GMSL3 Camera Platform, supporting the Maxim MAX96792A Deserializer |
| Cables/Accessories | |
|---|---|
| Part Number | Description |
| CBG341 | Mate-AX to 4x FAKRA Cable – 50Ω RG174, 1m length |
Custom Design
