-
Spec Sheet
Connect Tech’s Sprocket Carrier for NVIDIA® Jetson™ TX2 and TX2i is designed to match the NVIDIA Jetson module form factor. The Sprocket’s design includes 1x USB OTG, 1 x4 lane MIPI CSI-2, 2x 3.3V UART, 2x I2C, and 4x GPIO. This design provides our smallest and lowest profile solution yet. The Sprocket and Jetson TX2 or TX2i stack can be mounted flat in the smallest of spaces, perfect for space constrained payloads such as that of a drone. Jump right in to your next project with your Jetson TX2 or TX2i module and Sprocket. -
Spec Sheet
Connect Tech’s SSD/104 SATA 2.5” Drive Carrier is a complete rugged stackable storage solution that allows any 2.5” SATA hard drive to be installed into any Type II PCIe/104 stack or embedded system. The SSD/104 SATA 2.5” Drive Carrier expands storage capacity and reduces overall storage footprint in an embedded system. Designed to be used with any 2.5” SATA drive, the SSD/104 SATA 2.5” Drive Carrier can be used with the latest SATA III SSD’s for high performance applications or other high capacity drives. -
Spec Sheet
Connect Tech’s SSD/104 SATA is a complete rugged stackable solid state drive (SSD) and storage solution that allows up to two mSATA SSD modules to be installed into any PC/104-Plus, PCI-104, PCI/104-Express and PCIe/104 stack or embedded system. SSD/104 SATA solid state drive (SSD) and storage solution improves performance, expands storage capacity and reduces overall storage footprint in an embedded system. Designed with the latest generation of mSATA SSD modules, SSD/104 SATA solid state drive (SSD) and storage solution can be easily upgraded to accommodate future generations of mSATA modules for even greater system capacity and performance. When combined with mSATA SSD modules, SSD/104 SATA solid state storage solution directly interfaces with the standard SATA bus, which can be used as a drop-in replacement for any SATA storage device. SSD/104 SATA can also be interfaced with any single board computer or embedded system using standard 7-pin SATA. SSD/104 SATA is available as a complete storage solution with a preinstalled mSATA module, or as a separate mSATA carrier which supports any mSATA SSD module. -
Spec Sheet
The Imaging Source FPD-Link III Camera Board allows for the connection of FPD-Link III Deserializers to be connected to the Rogue, Rogue-X, and Forge carriers. Power to the cameras is provided by PoC (Power over Coax) so all the data, control signals, and power are sent through a single 50 Ohm Coaxial cable. This allows for flexibility in cable routing and ease of installation in automotive applications. The main power for the board comes from the Camera Expansion Header. -
Spec Sheet
The Titan/104-Plus combines the best in performance and design of full sized PCI bus devices with the rugged and compact form factor of PC/104. Fully 2.3 and PC/104-Plus 2.0 compliant, the modular Titan/104-Plus cards include a PC/104 pass-through connector option for compatibility with legacy PC/104 cards. Titan/104-Plus offers independent port configuration for baud rate and data bit options of 5, 6, 7, 8 and 9, as well as, 1, 1.5 and 2 stop bits. Select between odd and even parity. The Titan/104-Plus is perfect for embedded applications such as industrial PCs, kiosks, military systems, aerospace, medical systems, POS devices and any system requiring fast data transfer speeds within a rugged form factor. These self-stacking cards are low on power consumption and function well in industrial environments. -
Spec Sheet
Following a tradition of producing cost-effective serial cards while maintaining high performance and quality, Connect Tech's Titan offers a number of features on its small, 3U CompactPCI form factor. This flexible adapter board includes 2 or 4 ports of jumper selectable RS-232 or RS-485 configuration, the option for front or rear I/O, and support for all of the most popular operating systems, including Windows XP, Windows 2000 and Windows Server 2003. -
Spec Sheet
These robust rear panel I/O options for the Titan/cPCI are available in two 3U versions: Rear I/O and Rear I/O Opto. These reliable additions allow the convenience of rear I/O connectivity for your CompactPCI application, while maintaining high performance and reliability. -
Spec Sheet
Connect Tech’s TrailBlazer/SBC is a rugged single board computer offering locking pin header connectors and has been specifically designed for the Intel Bay Trail series CPU. TrailBlazer is available with a Quad Core E3845, Dual Core E3825 or Single Core E3815. Excellent for low power application needing a wide power input. With Mini-PCIe/mSATA/External SATA switching, Dual Gigabit Ethernet, and multiple display formats the TrailBlazer/SBC offers a full featured, flexible small form factor solution. -
Spec Sheet
Developed in partnership with USES Integrated Solutions, the TX2 Inference Server is an extremely low wattage, high performance deep learning inference server powered by the NVIDIA Jetson platform. Housed in a compact 1U chassis, the TX2 Inference Server can be outfitted with up to 24x NVIDIA Jetson TX2 modules. Within the Server, three processor module carriers house up to eight Jetson TX2 modules each, and are all connected via a Gigabit Ethernet fabric through a specialized Managed Ethernet Switch developed by Connect Tech with 10G uplink capability (XDG201). The TX2 Inference Server includes Out of Band Management (OOBM) via an ARM-based SMARC module to control and monitor each of the Jetson TX2 modules. The OOBM not only monitors the health/boot of each module, but also remotely hard power (on/off) them individually. -
Spec Sheet
Connect Tech’s Ultra Lite and Lite Qseven Carrier boards are low cost, feature rich carriers that integrate with any industry standard Qseven module. Ultra Lite and Lite Qseven Carrier Boards offer a variety of embedded processor options including AMD Fusion/G-Series, Intel® Atom™ Z500 & E600, Freescale i.MX6. These carrier boards are not tied to any specific bus architecture and offer Mini-PCIe and SIM-card expansion capability. Add your choice of Mini-PCIe peripherals, including WiFi, GPS, Bluetooth or storage depending on your application, and gain instant access to a low cost, compact and flexible computing solution. The Ultra Lite and Lite Qseven Carrier Boards are ideal for mobile entertainment, kiosks, digital signage, soldier wearables and gaming just to name a few -
Spec Sheet
Connect Tech’s XMC to PCIe/104 Adapter Board is an engineering tool for the purpose of enabling rapid development of systems requiring the use of next generation form factor peripheral cards. This adapter supports adding VITA 42 XMC cards to a Type 1 PCIe/104 system. -
Spec Sheet
Connect Tech’s Xtreme I/O ADC-DAC is an analog and digital peripheral board for the PCI-104 small form factor embedded marketplace. This product is ideal for data acquisition, measurement and control applications. -
Spec Sheet
Connect Tech’s Xtreme I/O Express ADC-DAC is an analog and digital peripheral board for the PCIe/104 small form factor embedded market place. This product is ideal for data acquisition, measurement and control applications. The Xtreme I/O Express ADC-DAC supports harsh environments with demanding conditions with an extended temperature range of -40°C to +85°C. -
Spec Sheet
High performance and versatility are trademarks of the Xtreme/104. An ideal serial card choice for your embedded applications, the Xtreme is available with 4 or 8 high speed asynchronous RS-232 or RS-422/485 ports, cabling options, and support for various operating systems. Quad UARTs provide each port with large data buffering capabilities, and each port can be configured for electrical interface, baud rate, parity, data and stop bits independently. The Xtreme/104 is the perfect combination of flexibility, high performance and cost-effectiveness. -
Spec Sheet
This high density adapter offers 12 asynchronous serial ports while maintaining full compliance with PC/104 form factor standards. It features eight jumper selectable RS-232/422/485 ports with support for full duplex, half duplex and multi-drop, as well as four RS-232 dedicated ports. To ensure maximum performance for your PC/104 based applications, industrial temperature range and 1.4kV RMS electrical isolation has been incorporated on each port of this board's design. iCoupler® isolation technology enables high data rates, high port density and low power consumption, making it the superior choice for electrical isolation. Xtreme/104 Isolated is an industrial strength solution ideal for control and automation applications requiring communications over short or long distances using PC/104 bus compatible computers. -
Spec Sheet
Compact yet powerful, the Xtreme/104 Opto PC/104 serial card performs where others fail. Durable and stackable, Xtreme/104 Opto’s small PC/104 form factor makes it the ideal serial communications link in today’s demanding embedded systems. Xtreme/104 Opto offers 3 kV optical isolation on all signals and ports to ensure smooth, error-free transmission of data even in the noisiest environments. With the added feature of industrial temperature range operation, this PC/104 serial card is well suited to any embedded computer system that is exposed to harsh conditions. Based on the 16C2850 UART with 128 byte transmit and receive FIFO buffers, Xtreme/104 Opto provides rapid data communications for your military, aerospace, medical, transportation and industrial automation applications. -
Spec Sheet
A PC/104 card designed with speed, flexibility and economy in mind, the Xtreme/104 RS-232 is ideal for environments requiring reliable connections, low power consumption and a compact form factor. Available in four or eight port densities, each port is capable of rapid data transfer rates up to 230.4 Kbps. Each jumper selectable port is controlled by a high performance quad UART, ensuring smooth communications and minimal data loss. -
Spec Sheet
Xtreme/104-Express is Connect Tech's first PCI/104-Express multi-port serial board. Fully PCI/104-Express compliant, this board provides a PCI-104 pass-through connector for easy transition from legacy PCI-104 cards to PCI Express stacks. Connect Tech's highest throughput to date, Xtreme/104-Express incorporates a fractional baud rate generator that allows almost any baud rate to be matched accurately. Fail-safe transceivers ensure glitch-free network operations, while industrial temperature grade components make certain your communications are protected from disruptions that can occur in harsh environments. This PCI/104-Express serial board offers reliability, high data rates and longevity for military, aerospace, medical, instrumentation and industrial control applications. -
Spec Sheet
Connect Tech's PCIe/104 serial cards offer advantages including rapid data transfer, high reliability and reduced system costs because of the stacking nature of the PC/104 form factor. Xtreme/104-Express Opto serial cards maximize ruggedness by adding 3 kV optical isolation to protect your industrial and embedded applications. Xtreme/104-Express Opto includes a fractional baud rate generator that matches almost any baud rate accurately. Additionally, Xtreme/104-Express Opto offers large 256 byte FIFO buffers, 9-bit data support, and is suitable for industrial temperature requirements (-40ºC to 85ºC). Connect Tech's PCIe/104 serial boards provide longevity for critical military, aerospace, medical, instrumentation and industrial control applications. -
Spec Sheet
High performance and versatility are trademarks of the Xtreme/104 PC/104 serial card family. Now the Xtreme/104-Plus offers more choice for your embedded applications requiring a small footprint, but fast data transfer rates. The Xtreme/104-Plus is available with 4 or 8 high speed asynchronous RS-232/422/485 ports, 8 selectable RS-232/422/485/TTL ports, or choose 2 or 4 dedicated RS-423 ports. High performance UARTs provide each port with large data buffering capabilities, and each port on the switchable models can be configured for electrical interface, baud rate, parity, data and stop bits independently. The Xtreme/104-Plus is the perfect combination of flexibility, high performance and cost-effectiveness -
Spec Sheet
Connect Tech’s Xtreme/104-Plus 16 Port offers 16 ports of switchable RS-232/422/485 on a single PC/104-Plus card. This provides the highest port density and most flexible PC/104-Plus serial port solution available. Dependability, high speed data transfer rates, and high density makes the Xtreme/104-Plus 16 Port a must where space is at a premium. The Xtreme/104-Plus 16 Port is ideally suited for embedded systems where high serial port count and a small footprint is required. Example markets are remote submersibles, remote aerial or land vehicles, remote monitoring stations, or anywhere that high serial port density is required. -
Spec Sheet
Connect Tech's robust Xtreme/104-Plus product family has introduced optical isolation as an additional feature to its product offering. Xtreme/104-Plus Opto provides the added protection of 3kV optical isolation on a rugged and compact form factor for your critical applications. PCI 2.3 and PC/104 2.0 compliant, this PC/104-Plus card includes a PC/104 pass-through connector for compatibility with legacy PC/104 cards. Dependability, high speed data transfer rates and 3kV of optical isolation protection make these cards ideal in environments where harsh conditions may disrupt communications. Use Xtreme/104-Plus Opto for embedded systems in the military, aerospace, medical and industrial sectors. -
Spec Sheet
Connect Tech’s Xtreme/GbE Managed Carrier Ethernet Switch provides Carrier Grade Ethernet switching capabilities in an extremely small embedded form factor.
Excellent for high-end applications such as Mobile and Microwave backhaul, the Xtreme/GbE Managed Carrier Ethernet Switch is also a highly reliable way to communicate with 10/100/1000 devices in an embedded system. Powered by the latest generation Carrier Ethernet Switch engine the Microchip VSC7428/VSC7429. Its embedded 416 MHz MIPS 32-bit CPU, 1Gb DDR2 external memory and DMA-based frame extraction and insertion support timing over packet, Ethernet OAM, and performance monitoring.
Available in models with RJ-45 or Rugged Positive Locking Headers, making this embedded Ethernet switch ideal for any type of environment. -
Spec Sheet
Connect Tech’s Xtreme/GPU brings exceptional desktop-level graphics, outstanding multimedia features, and GPU processing power to the PCIe/104 form factor; with the ability to select either AMD or NVIDIA® graphical solutions. Connect Tech’s AMD version of the Xtreme/GPU is a high end graphics unit, used to drive up to four Mini DisplayPort connections for either independent use, or leveraging AMD Eyefinity technology, as a single large surface. On-board passive circuitry allows for the use of Dual-Mode DisplayPort, enabling the use of DVI or HDMI dongles if DisplayPort is not preferred. With Connect Tech’s NVIDIA solution, the Xtreme/GPU transforms into a processing powerhouse. With access to the NVIDIA CUDA® Cores, the GPU can become a parallel computational CPU for non-graphical applications.
