-
Spec Sheet
Connect Tech's GMSL2 Plus camera platform allows up to 8 cameras to be connected to Connect Tech carriers, accelerated by the NVIDIA® Jetson AGX Orin™ and Jetson Thor™ T5000 modules. Power to the cameras is provided by PoC (Power over Coax) so all the data, control signals, and power are sent through a single 50 ohm coaxial cable. This allows for flexibility in cable routing and ease of installation in automotive applications. Short detection and overcurrent protection ensure a robust, production ready solution. The board is compatible with GMSL2 cameras up to 6Gbps. Each quad coax connector can be configured independently via software to set the channel modulation and tunnel/pixel mode. -
Spec Sheet
Connect Tech's GMSL3 camera platform allows up to 8 cameras to be connected to Connect Tech carriers, accelerated by the NVIDIA® Jetson AGX Orin™ and Jetson Thor™ T5000 modules. Power to the cameras is provided by PoC (Power over Coax) so all the data, control signals, and power are sent through a single 50 ohm coaxial cable. This allows for flexibility in cable routing and ease of installation in automotive applications. Short detection and overcurrent protection ensure a robust, production ready solution. The board is compatible with GMSL3 cameras up to 12Gbps using PAM4, as well as GMSL2 cameras up to 6Gbps. Each quad coax connector can be configured independently via software to set the channel modulation and tunnel/pixel mode. -
Spec Sheet
The JCB006 camera expansion board allows for the connection of FPD-Link III Deserializers to be connected to the Rogue or Rogue-X carriers. Power to the cameras is provided by PoC (Power over Coax) so all the data, control signals, and power are sent through a single 50 Ohm Coaxial cable. This allows for flexibility in cable routing and ease of installation in automotive applications. The main power for the board comes from the Camera Expansion Header. -
Connect Tech’s Leopard Imaging GMSL camera board is an expansion board that allows up to 8 Leopard Imaging GMSL cameras to be connected to the Jetson AGX Xavier module. The JCB002 interfaces with GMSL2 protocols. Power to the cameras is provided by PoC (Power over Coax) so all the data, control signals, and power are sent through a single 50 Ohm Coaxial cable. This allows for flexibility in cable routing and ease of installation in automotive applications. The main power for the board comes from the Camera Expansion Header. The 12V power for the cameras is also available from the same header on the Rogue carrier. NVIDIA’s development kit does not provide voltage here, so a hot pluggable external 12V connector is available on the JCB002. The circuit will always take the external voltage if both are connected. -
Connect Tech’s e-con GMSL camera board is an expansion board that allows up to 8 e-con systems GMSL cameras to be connected to the Jetson AGX Xavier module. The JCB002 interfaces with GMSL2 protocols. Power to the cameras is provided by PoC (Power over Coax) so all the data, control signals, and power are sent through a single 50 Ohm Coaxial cable. This allows for flexibility in cable routing and ease of installation in automotive applications. The main power for the board comes from the Camera Expansion Header. The 12V power for the cameras is also available from the same header on the Rogue carrier. NVIDIA’s development kit does not provide voltage here, so a hot pluggable external 12V connector is available on the JCB002. The circuit will always take the external voltage if both are connected. -
Spec Sheet
Connect Tech’s Leopard Imaging GMSL camera board is an expansion board that allows up to 8 Leopard Imaging GMSL cameras to be connected to the Jetson AGX Xavier module. The JCB002 interfaces with GMSL2 protocols. Power to the cameras is provided by PoC (Power over Coax) so all the data, control signals, and power are sent through a single 50 Ohm Coaxial cable. This allows for flexibility in cable routing and ease of installation in automotive applications. The main power for the board comes from the Camera Expansion Header at +12V. The 12V power for the cameras is also available from the same header on the Rogue carrier. NVIDIA’s development kit does not provide voltage here, so a hot pluggable external +9V to +24V connector is available on the JCB002. The circuit will always take the external voltage if both are connected. -
Spec Sheet
Connect Tech’s e-con GMSL camera board is an expansion board that allows up to 8 e-con systems GMSL cameras to be connected to the Jetson AGX Xavier™ or the Jetson AGX Xavier™ module. The JCB002 interfaces with GMSL2 protocols. Power to the cameras is provided by PoC (Power over Coax) so all the data, control signals, and power are sent through a single 50 Ohm Coaxial cable. This allows for flexibility in cable routing and ease of installation in automotive applications. The main power for the board comes from the Camera Expansion Header at +12V. The 12V power for the cameras is also available from the same header on the Rogue carrier. NVIDIA’s development kit does not provide voltage here, so a hot pluggable external +9V to +24V connector is available on the JCB002. The circuit will always take the external voltage if both are connected. -
Spec Sheet
Connect Tech’s GMSL camera platform is an expansion board that allows up to 8 cameras to be connected to the Jetson AGX Orin module. Since many different types of GMSL cameras are available, the JCB002 has user selectable options to interface with either GMSL1 or GMSL2 protocols at different operating frequencies. Power to the cameras is provided by PoC (Power over Coax) so all the data, control signals, and power are sent through a single 50 Ohm Coaxial cable. This allows for flexibility in cable routing and ease of installation in automotive applications. The main power for the board comes from the Camera Expansion Header at +12V. The 12V power for the cameras is also available from the same header on the Rogue carrier line of products. NVIDIA’s development kit does not provide voltage here, so a hot pluggable external +9V to +24V connector is available on the JCB002. The circuit will always take the external voltage if both are connected. -
Spec Sheet
Connect Tech’s Intel® RealSense™ GMSL camera board is an expansion board that allows up to 8 Intel® RealSense™ GMSL cameras to be connected to the Jetson AGX Xavier™ and Jetson AGX Orin™ modules. The JCB002 interfaces with GMSL2 protocols. Power to the cameras is provided by PoC (Power over Coax) so all the data, control signals, and power are sent through a single 50 Ohm Coaxial cable. This allows for flexibility in cable routing and ease of installation in automotive applications. The main power for the board comes from the Camera Expansion Header at +12V. The 12V power for the cameras is also available from the same header on the Rogue carrier. NVIDIA’s development kit does not provide voltage here, so a hot pluggable external +9V to +24V connector is available on the JCB002. The circuit will always take the external voltage if both are connected. -
Spec Sheet
The Allied Vision FPD-Link III Camera Board allows for the connection of FPD-Link III Deserializers to be connected to the Rogue, Rogue-X, and Forge carriers. Power to the cameras is provided by PoC (Power over Coax) so all the data, control signals, and power are sent through a single 50 Ohm Coaxial cable. This allows for flexibility in cable routing and ease of installation in automotive applications. The main power for the board comes from the Camera Expansion Header. -
Spec Sheet
The Imaging Source FPD-Link III Camera Board allows for the connection of FPD-Link III Deserializers to be connected to the Rogue, Rogue-X, and Forge carriers. Power to the cameras is provided by PoC (Power over Coax) so all the data, control signals, and power are sent through a single 50 Ohm Coaxial cable. This allows for flexibility in cable routing and ease of installation in automotive applications. The main power for the board comes from the Camera Expansion Header. -
Spec Sheet
Connect Tech’s e-con GMSL camera board is an expansion board that allows up to 8 Allied Vision GMSL cameras to be connected to the Jetson AGX Xavier™ or the Jetson AGX Xavier™ module. The JCB002 interfaces with GMSL2 protocols. Power to the cameras is provided by PoC (Power over Coax) so all the data, control signals, and power are sent through a single 50 Ohm Coaxial cable. This allows for flexibility in cable routing and ease of installation in automotive applications. The main power for the board comes from the Camera Expansion Header at +12V. The 12V power for the cameras is also available from the same header on the Rogue carrier. NVIDIA’s development kit does not provide voltage here, so a hot pluggable external +9V to +24V connector is available on the JCB002. The circuit will always take the external voltage if both are connected.
