-
Spec Sheet
Connect Tech’s Rosie is a small form factor, rugged embedded system based on the NVIDIA® Jetson™ TX2/TX2i. Housed in a rugged compact enclosure with optional mounting brackets, Rosie features revolutionary NVIDIA Pascal™ architecture with 256 CUDA cores delivering over 1 TeraFLOPs of performance with a 64-bit ARM A57 CPU. Rosie’s rugged system also provides USB, HDMI, Gigabit Ethernet, WiFi, and Bluetooth capabilities all with IP68 rated Ingress protection. Custom face plates are easily accommodated using Connect Tech design services. Rosie is designed to MIL-STD 810g and DO-160G harsh environments. -
Spec Sheet
The COM Express® + GPU Embedded System from Connect Tech combines Intel® Skylake and Kaby Lake x86 processors with high-end NVIDIA® Quadro® and Tesla® Graphics Processing Units (GPU) all into a ruggedized small form factor embedded system. Choose from highest-end, highest-performance models or from low-powered extended temperature models all ideal for high-end encode/decode video applications or GPGPU CUDA® processing applications. This embedded system exposes all of the latest generation interconnect including: Gigabit Ethernet, USB 3.0 and 2.0, DisplayPort++, VGA, LVDS, SATA III, GPIO, I2C, mSATA, miniPCIe, PCIe/104 and SD Card Expansion. This embedded system uses all locking ruggedized positive latching connectors. VXG part numbers have Passive Heat Spreaders that are to be installed into a Customer Designed End Thermal Solution. DXG part numbers have an Active Cooling Solution with Integrated Support Frame. -
Spec Sheet
Connect Tech’s Elroy Carrier for NVIDIA® Jetson™ TX2/TX2i brings a low cost deployable Jetson™ TX2/TX2i solution to the market. Designed to match the NVIDIA® Jetson™ TX2 or TX2i module form factor, the Elroy’s design includes Dual x2 MIPI CSI-2 Video Inputs, Mini-PCIe/mSATA expansion, HDMI Video, USB 3.0 and 2.0, and two Serial Ports for RS-232/485. All of this is designed for use in a small form factor rugged environment. With locking pin-header connectors, solder in standoffs, and industrial temperature range components, the Elroy is going places. -
Spec Sheet
Astro is specifically designed to work with the NVIDIA® Jetson™ TX2 or TX2i supercomputer-on-module. The Astro Carrier provides access to features found on the Jetson TX2/TX2i module in an extremely small footprint (87mm x 57mm/3.43" x 2.24"). It makes use of a high density, board-to-board connector that allows for use with Connect Tech’s off the shelf or custom designed break out boards. -
Spec Sheet
Connect Tech’s Orbitty Carrier for NVIDIA® Jetson™ TX2, TX2 4GB, and TX2i is designed to match the NVIDIA Jetson TX2/TX2i module form factor. The Orbitty’s design includes 1x USB 3.0, 1x USB 2.0 OTG, 1x HDMI, 1x GbE, 1x microSD, 2x 3.3V UART, I2C, and 4x GPIO. Ideal for robotics and unmanned applications or any small form factor rugged environment. Orbitty rounds out our Jetson TX2 and TX2i line of products offering our lowest priced carrier yet. Get up and running quick with your Jetson™ TX2 module and Orbitty. -
Spec Sheet
Connect Tech's DFlex is one of the most versatile serial adapters in the business. Available in two, four and eight ports, the DFlex provides a highly flexible solution for your multi-channel serial communication needs. Through the use of Serial Line Interface Modules, DFlex boards are fully user-configurable to suit the various I/O requirements of a specific application. -
Spec Sheet
These robust rear panel I/O options for the Titan/cPCI are available in two 3U versions: Rear I/O and Rear I/O Opto. These reliable additions allow the convenience of rear I/O connectivity for your CompactPCI application, while maintaining high performance and reliability. -
Spec Sheet
The Echo/ISA is an 8 port serial card designed for those needing continued support for ISA bus based systems. Multiple Echo boards can reside in a system to accommodate large multi-channel I/O requirements. This flexible solution enables independent configuration of each port's baud rate, parity, data and stop bits, and supports the most popular operating systems. -
Spec Sheet
The low profile BlueStorm/LP is the perfect fit for your high density chassis or low profile PC. Fully Universal PCI 2.3 compliant, this RS-422/485 adapter can be installed in either a 3.3V or 5V system, and fits into low profile and standard height PCI computers with the change of a bracket. This enables you to connect multiple devices to your system, taking full advantage of the space saving qualities of its MD1 low profile design without sacrificing performance. Data speeds up to 1.8432 Mbps (RS-422/485) ensure your data acquisition, office automation, POS, self-service kiosk or scientific/instrumentation applications communicate in a reliable, cost-effective manner. The BlueStorm/LP supports three RS-422/485 modes: full duplex (four wire) with RTS/CTS flow control, half duplex (two wire) with auto TxD echo cancellation, and multi-drop (four wire) full duplex communications of multi-drop devices. Available with surge suppression or without and DB-9 male cables, the boards can be ordered with low profile bracket, standard sized bracket or both for the ultimate flexibility. The BlueStorm/LP comes in 2, 4 and 8 port RS-422/485 models as well as 1 plus 1, 2 plus 2, and 4 plus 4 RS-232 plus RS-422/485 models. -
Spec Sheet
Fast and reliable, the highly adaptable Blue Heat/PCI RS-422/485 serial card offers you a number of options for your application needs. Up to 8 RS-422/485 and RS-232 ports are available, with support for all three RS-485 modes. It provides an ideal solution for all applications requiring single node or multi-drop communications over short or long distances using PCI bus compatible computers. This high performance, multi-port serial adapter is ideal for data collection devices, POS and Kiosk equipment, and industrial automation equipment. With support for all the popular operating systems and a number of cabling options, this efficient product is a great fit in any PCI system. -
Spec Sheet
A perfect blend of quality and cost-effectiveness, the Blue Heat/PCI RS-232 serial card provides an ideal industrial strength solution for your application needs. Offering a choice of 2, 4 or 8 asynchronous RS-232 serial ports, the Blue Heat/PCI has the flexibility to perform in a wide variety of applications. Whether it be data acquisition, industrial or office automation, POS and Kiosks, or scientific/instrumentation applications, the Blue Heat/PCI is a powerful choice for any situation requiring high-speed, multi-channel serial data collection and processing. Cabling options and support for most operating systems add to its ability to fit your specific requirements. -
Spec Sheet
The low profile BlueStorm/LP is the perfect fit for your high density chassis or low profile PC. Fully Universal PCI 2.3 compliant, this RS-232 adapter can be installed in either a 3.3V or 5V system, and fits into low profile and standard height PCI computers with the change of a bracket. This enables you to connect multiple devices to your system, taking full advantage of the space saving qualities of its MD1 low profile design without sacrificing performance. Data speeds up to 921.6 Kbps ensure your data acquisition, office automation, POS, self-service kiosk or scientific/instrumentation applications communicate in a reliable, cost-effective manner. Available with or without surge suppression and DB-9 male cables, the PCI serial cards can be ordered with low profile bracket, standard sized bracket or both for the ultimate flexibility. The BlueStorm/LP comes in 2, 4 and 8 port RS-232 serial interface models as well as 1 plus 1, 2 plus 2, and 4 plus 4 RS-232 plus RS-422/485 serial interface models. -
Spec Sheet
BlueStorm/Express provides reliable, high speed data transfer for PCI Express systems. These x1 lane PCI Express serial cards offer two, four, eight or 16 ports of RS-232/422/485 connectivity and are compatible with any PCI Express slot. Bidirectional data speeds up to 1.8432 Mbps (RS-422/485) ensure fast communications for your industrial and embedded applications. BlueStorm/Express supports three RS-422/485 modes: full duplex (four wire) with RTS/CTS flow control, half duplex (two wire) with auto TxD echo cancellation and multi-drop (four wire) communications. All Connect Tech PCI Express products are FCC certified and CE marked. -
Spec Sheet
Compact yet powerful, the Xtreme/104 Opto PC/104 serial card performs where others fail. Durable and stackable, Xtreme/104 Opto’s small PC/104 form factor makes it the ideal serial communications link in today’s demanding embedded systems. Xtreme/104 Opto offers 3 kV optical isolation on all signals and ports to ensure smooth, error-free transmission of data even in the noisiest environments. With the added feature of industrial temperature range operation, this PC/104 serial card is well suited to any embedded computer system that is exposed to harsh conditions. Based on the 16C2850 UART with 128 byte transmit and receive FIFO buffers, Xtreme/104 Opto provides rapid data communications for your military, aerospace, medical, transportation and industrial automation applications. -
Spec Sheet
A PC/104 card designed with speed, flexibility and economy in mind, the Xtreme/104 RS-232 is ideal for environments requiring reliable connections, low power consumption and a compact form factor. Available in four or eight port densities, each port is capable of rapid data transfer rates up to 230.4 Kbps. Each jumper selectable port is controlled by a high performance quad UART, ensuring smooth communications and minimal data loss. -
Spec Sheet
High performance and versatility are trademarks of the Xtreme/104. An ideal serial card choice for your embedded applications, the Xtreme is available with 4 or 8 high speed asynchronous RS-232 or RS-422/485 ports, cabling options, and support for various operating systems. Quad UARTs provide each port with large data buffering capabilities, and each port can be configured for electrical interface, baud rate, parity, data and stop bits independently. The Xtreme/104 is the perfect combination of flexibility, high performance and cost-effectiveness. -
Spec Sheet
Connect Tech’s Xtreme/GbE Managed Carrier Ethernet Switch provides Carrier Grade Ethernet switching capabilities in an extremely small embedded form factor.
Excellent for high-end applications such as Mobile and Microwave backhaul, the Xtreme/GbE Managed Carrier Ethernet Switch is also a highly reliable way to communicate with 10/100/1000 devices in an embedded system. Powered by the latest generation Carrier Ethernet Switch engine the Microchip VSC7428/VSC7429. Its embedded 416 MHz MIPS 32-bit CPU, 1Gb DDR2 external memory and DMA-based frame extraction and insertion support timing over packet, Ethernet OAM, and performance monitoring.
Available in models with RJ-45 or Rugged Positive Locking Headers, making this embedded Ethernet switch ideal for any type of environment. -
Spec Sheet
The Photon carrier board is a Jetson™ AI Camera Platform specifically designed to support smart camera applications. This carrier provides PoE PD Gigabit Ethernet uplink for data and power and has various I/O connectors positioned for easy packaging into off-the-shelf camera housings. Photon empowers fast deployment of vision-enabled AI applications requiring multiple camera streams within a compact footprint. Since Photon is compatible with the NIVIDA® Jetson™ Nano, TX2™ NX, Xavier™ NX, Orin™ Nano, and Orin™ NX modules, users can seamlessly transition between the four SoM options should their AI processing requirements change. For applications that don’t require PoE PD ask for our lower cost Non-PoE PD options. While Photon is compatible with NVIDIA Jetson Nano, TX2 NX, Xavier NX and Orin NX SoMs, some I/O availability will change across modules. View the Photon Compatibility Specifications for a full breakdown. NOTE: Do not use the 19V power supply from the Jetson Xavier™ NX Dev Kit with the Photon. Integrations with external storage and WiFi/Bluetooth via Intel are also available, contact [email protected] for more details. -
Spec Sheet
Connect Tech’s Intel® RealSense™ GMSL camera board is an expansion board that allows up to 8 Intel® RealSense™ GMSL cameras to be connected to the Jetson AGX Xavier™ and Jetson AGX Orin™ modules. The JCB002 interfaces with GMSL2 protocols. Power to the cameras is provided by PoC (Power over Coax) so all the data, control signals, and power are sent through a single 50 Ohm Coaxial cable. This allows for flexibility in cable routing and ease of installation in automotive applications. The main power for the board comes from the Camera Expansion Header. The 12V power for the cameras is also available from the same header on the Rogue carrier. NVIDIA’s development kit does not provide voltage here, so a hot-pluggable external 12V connector is available on the JCB002. The circuit will always take the external voltage if both are connected. -
Spec Sheet
The Allied Vision FPD-Link III Camera Board allows for the connection of FPD-Link III Deserializers to be connected to the Rogue, Rogue-X, and Forge carriers. Power to the cameras is provided by PoC (Power over Coax) so all the data, control signals, and power are sent through a single 50 Ohm Coaxial cable. This allows for flexibility in cable routing and ease of installation in automotive applications. The main power for the board comes from the Camera Expansion Header. -
Spec Sheet
The Hadron GMSL Carrier Board for Orin™ Nano and Orin™ NX stands out as an ultra-compact, robust, and feature-rich solution, boasting dual GMSL2 camera inputs. It ensures high-speed, dependable data communication, crucial for autonomous applications. Just slightly larger than the Jetson™ SODIMM module, Hadron is perfect for GMSL vision applications, inference processing, and unmanned payloads, making it an ideal choice for AI computing at the Edge. Hadron’s design accepts a wide input voltage range, provides a comprehensive I/O set, with locking I/O connectors optimized for rugged environments. -
Spec Sheet
The Imaging Source FPD-Link III Camera Board allows for the connection of FPD-Link III Deserializers to be connected to the Rogue, Rogue-X, and Forge carriers. Power to the cameras is provided by PoC (Power over Coax) so all the data, control signals, and power are sent through a single 50 Ohm Coaxial cable. This allows for flexibility in cable routing and ease of installation in automotive applications. The main power for the board comes from the Camera Expansion Header. -
Spec Sheet
Connect Tech’s e-con systems Rudi-NX is the ultimate Edge AI computing device for state-of-the-art, compute-intensive applications. Powered by NVIDIA® Jetson Xavier™ NX, it can deliver up to 21 TOPS of performance in 15W. With 384 CUDA Cores, 48 Tensor Cores, and 2 NVDLA engines, it can run multiple modern neural networks in parallel and process high-resolution data from multiple sensors simultaneously. The Rudi-NX enables multiple vision inputs including up to 4x GMSL (MIPI CSI-2) Camera inputs, 4x USB 3.0 ports and 2x Gigabit Ethernet ports. Additional connectivity via CAN, UARTs, RS-485, I2C, SPI, and GPIO. -
Spec Sheet
The Hadron Carrier Board for Jetson Orin™ Nano is an ultra small, rugged and feature rich carrier for AI Computing at the Edge. Just slightly larger than the Jetson™ SODIMM module, Hadron is ideal for vision applications, inference, and unmanned payloads. Since the Hadron carrier board is compatible with the Jetson Orin™ NX, Orin™ Nano, Xavier™ NX, and TX2™ NX modules, users can transition between modules depending on their AI processing requirements. Hadron’s design includes a wide input voltage, rich I/O set as well as locking IO connectors optimized for rugged environments.
