-
Spec Sheet
Connect Tech’s Intel® RealSense™ GMSL camera board is an expansion board that allows up to 8 Intel® RealSense™ GMSL cameras to be connected to the Jetson AGX Xavier™ and Jetson AGX Orin™ modules. The JCB002 interfaces with GMSL2 protocols. Power to the cameras is provided by PoC (Power over Coax) so all the data, control signals, and power are sent through a single 50 Ohm Coaxial cable. This allows for flexibility in cable routing and ease of installation in automotive applications. The main power for the board comes from the Camera Expansion Header. The 12V power for the cameras is also available from the same header on the Rogue carrier. NVIDIA’s development kit does not provide voltage here, so a hot-pluggable external 12V connector is available on the JCB002. The circuit will always take the external voltage if both are connected. -
Spec Sheet
The Allied Vision FPD-Link III Camera Board allows for the connection of FPD-Link III Deserializers to be connected to the Rogue, Rogue-X, and Forge carriers. Power to the cameras is provided by PoC (Power over Coax) so all the data, control signals, and power are sent through a single 50 Ohm Coaxial cable. This allows for flexibility in cable routing and ease of installation in automotive applications. The main power for the board comes from the Camera Expansion Header. -
This Vision Bundle pairs the Rogue-X Carrier Board with the Allied Vision MIPI Board for a streamlined deployment of AI Vision applications. Empowering rapid integration of your chosen cameras, the Allied Vision MIPI Camera Board allows for direct attachment of up to six MIPI sensors without the need of additional hardware components. Designed specifically to integrate up to six Allied Vision Alvium 1500 C and 1800 C sensors, this Camera Board comes supplied with all device-tree software necessary to integrate the cameras into your application - no further software development required. With seamless integration to the Connect Tech Rogue-X Carrier Board, users are able to transition from development to production without additional application development. Users have the option of integrating either 6x 2-lane or 4x 4-lane MIPI CSI-2 cameras from the Allied Vision Alvium 1500 C and 1800 C camera series. Browse Allied Vision Alvium 1500 C Camera Series - Click Here Browse Allied Vision Alvium 1800 C Camera Series - Click Here Additional Board Features- Suitable for Industrial Applications with extended temperature range of -40°C to +85°C (-40°F to +185°F)
- Can source +12V power from the Camera Expansion header on the Rogue-X Carrier
-
Spec Sheet
The Imaging Source FPD-Link III Camera Board allows for the connection of FPD-Link III Deserializers to be connected to the Rogue, Rogue-X, and Forge carriers. Power to the cameras is provided by PoC (Power over Coax) so all the data, control signals, and power are sent through a single 50 Ohm Coaxial cable. This allows for flexibility in cable routing and ease of installation in automotive applications. The main power for the board comes from the Camera Expansion Header. -
Rogue Carrier Connect Tech’s Rogue is a full featured Carrier Board for the NVIDIA® Jetson AGX Xavier™ module. This carrier board for Jetson AGX Xavier is specifically designed for commercially deployable platforms, and has an extremely small footprint of 92 x 105mm. The Rogue provides access to an impressive list of latest generation interfaces on the Jetson AGX Xavier while adding additional interfaces of 3x USB 3.1, 2x GbE, 2x HDMI and a locking Mini-Fit Jr. power input connector. Rugged camera add-on expansion boards also allow Rogue to interface directly with the Jetson AGX Xavier high density MIPI CSI interfaces. GMSL Camera Board Connect Tech’s GMSL camera platform is an expansion board that allows up to 4 cameras to be connected to the Jetson Xavier module. Since many different types of GMSL cameras are available, the JCB002 has user selectable options to interface with either GMSL1 or GMSL2 protocols at different operating frequencies. Power to the cameras is provided by PoC (Power over Coax) so all the data, control signals, and power are sent through a single 50 Ohm Coaxial cable. This allows for flexibility in cable routing and ease of installation in automotive applications. The main power for the board comes from the Camera Expansion Header. The 12V power for the cameras is also available from the same header on the Rogue carrier. NVIDIA’s development kit does not provide voltage here, so a hot pluggable external 12V connector is available on the JCB002. The circuit will always take the external voltage if both are connected. NileCAM30 - 3.4 MP GMSL Camera Module NileCAM30 is a first GMSL camera in the NileCAM camera series. NileCAM30 is a two board solution containing the camera module and serializer board. This camera is based on AR0330 CMOS image sensor from ON Semiconductor®. The NileCAM30 comes with 3 meters or 15 meters coaxial cable with FAKRA connector. The NileCAM30 has an S-mount (M12) lens holder which allows customers to choose and use the lens according to their application requirement. -
Spec Sheet
The Allied Vision MIPI Camera Board is the vision solution that Jetson AGX Xavier project developers have been wishing for. Empowering rapid integration of your chosen cameras, this Camera Board allows for direct attachment of up to six MIPI sensors without the need of additional hardware components. Designed specifically to integrate up to six Allied Vision Alvium 1500 C and 1800 C sensors, this Camera Board comes supplied with all device-tree software necessary to integrate the cameras into your application - no further software development required. With seamless integration to the Connect Tech Rogue and Rogue-X Carrier Boards, users are able to transition from development to production without additional application development. Users have the option of integrating either 6x 2-lane or 4x 4-lane MIPI CSI-2 cameras from the Allied Vision Alvium 1500 C and 1800 C camera series. Browse Allied Vision Alvium 1500 C Camera Series - Click Here Browse Allied Vision Alvium 1800 C Camera Series - Click Here Additional Board Features- Suitable for Industrial Applications with extended temperature range of -40°C to +85°C (-40°F to +185°F)
- Can source +12V power from the Camera Expansion header on the Rogue and Rogue-X Carriers
-
Spec Sheet
Connect Tech’s e-con GMSL camera board is an expansion board that allows up to 8 e-con systems GMSL cameras to be connected to the Jetson AGX Xavier™ or the Jetson AGX Xavier™ module. The JCB002 interfaces with GMSL2 protocols. Power to the cameras is provided by PoC (Power over Coax) so all the data, control signals, and power are sent through a single 50 Ohm Coaxial cable. This allows for flexibility in cable routing and ease of installation in automotive applications. The main power for the board comes from the Camera Expansion Header. The 12V power for the cameras is also available from the same header on the Rogue carrier. NVIDIA®’s development kit does not provide voltage here, so a hot pluggable external 12V connector is available on the JCB002. The circuit will always take the external voltage if both are connected. -
Spec Sheet
Connect Tech’s Leopard Imaging GMSL camera board is an expansion board that allows up to 8 Leopard Imaging GMSL cameras to be connected to the Jetson AGX Xavier module. The JCB002 interfaces with GMSL2 protocols. Power to the cameras is provided by PoC (Power over Coax) so all the data, control signals, and power are sent through a single 50 Ohm Coaxial cable. This allows for flexibility in cable routing and ease of installation in automotive applications. The main power for the board comes from the Camera Expansion Header. The 12V power for the cameras is also available from the same header on the Rogue carrier. NVIDIA’s development kit does not provide voltage here, so a hot pluggable external 12V connector is available on the JCB002. The circuit will always take the external voltage if both are connected. -
This Vision Bundle pairs the Rogue Carrier Board with the Allied Vision MIPI Board for a streamlined deployment of AI Vision applications. Empowering rapid integration of your chosen cameras, the Allied Vision MIPI Camera Board allows for direct attachment of up to six MIPI sensors without the need of additional hardware components. Designed specifically to integrate up to six Allied Vision Alvium 1500 C and 1800 C sensors, this Camera Board comes supplied with all device-tree software necessary to integrate the cameras into your application - no further software development required. With seamless integration to the Connect Tech Rogue Carrier Board, users are able to transition from development to production without additional application development. Users have the option of integrating either 6x 2-lane or 4x 4-lane MIPI CSI-2 cameras from the Allied Vision Alvium 1500 C and 1800 C camera series. Browse Allied Vision Alvium 1500 C Camera Series - Click Here Browse Allied Vision Alvium 1800 C Camera Series - Click Here Additional Camera Board Features
- Suitable for Industrial Applications with extended temperature range of -40°C to +85°C (-40°F to +185°F)
- Can source +12V power from the Camera Expansion header on the Rogue Carrier
-
Connect Tech’s e-con GMSL camera board is an expansion board that allows up to 8 e-con systems GMSL cameras to be connected to the Jetson AGX Xavier module. The JCB002 interfaces with GMSL2 protocols. Power to the cameras is provided by PoC (Power over Coax) so all the data, control signals, and power are sent through a single 50 Ohm Coaxial cable. This allows for flexibility in cable routing and ease of installation in automotive applications. The main power for the board comes from the Camera Expansion Header. The 12V power for the cameras is also available from the same header on the Rogue carrier. NVIDIA’s development kit does not provide voltage here, so a hot pluggable external 12V connector is available on the JCB002. The circuit will always take the external voltage if both are connected. -
Connect Tech’s Leopard Imaging GMSL camera board is an expansion board that allows up to 8 Leopard Imaging GMSL cameras to be connected to the Jetson AGX Xavier module. The JCB002 interfaces with GMSL2 protocols. Power to the cameras is provided by PoC (Power over Coax) so all the data, control signals, and power are sent through a single 50 Ohm Coaxial cable. This allows for flexibility in cable routing and ease of installation in automotive applications. The main power for the board comes from the Camera Expansion Header. The 12V power for the cameras is also available from the same header on the Rogue carrier. NVIDIA’s development kit does not provide voltage here, so a hot pluggable external 12V connector is available on the JCB002. The circuit will always take the external voltage if both are connected. -
Rogue Carrier Connect Tech’s Rogue is a full featured Carrier Board for the NVIDIA® Jetson AGX Xavier™ module. This carrier board for Jetson AGX Xavier is specifically designed for commercially deployable platforms, and has an extremely small footprint of 92 x 105mm. The Rogue provides access to an impressive list of latest generation interfaces on the Jetson AGX Xavier while adding additional interfaces of 3x USB 3.1, 2x GbE, 2x HDMI and a locking Mini-Fit Jr. power input connector. Rugged camera add-on expansion boards allow Rogue to interface directly with the Jetson AGX Xavier high density MIPI CSI interfaces. GMSL Camera Board The GMSL Camera Board allows up to 8 cameras to be connected to the Jetson Xavier module. Since many different types of GMSL cameras are available, the JCB002 has user selectable options to interface with either GMSL1 or GMSL2 protocols at different operating frequencies. Power to the cameras is provided by PoC (Power over Coax) so all the data, control signals, and power are sent through a single 50 Ohm Coaxial cable. This allows for flexibility in cable routing and ease of installation in automotive applications. The main power for the board comes from the Camera Expansion Header. The 12V power for the cameras is also available from the same header on the Rogue carrier. NVIDIA’s development kit does not provide voltage here, so a hot pluggable external 12V connector is available on the JCB002. The circuit will always take the external voltage if both are connected. NileCAM30 - 3.4 MP GMSL Camera Module NileCAM30 is a first GMSL camera in the NileCAM camera series. NileCAM30 is a two board solution containing the camera module and serializer board. This camera is based on AR0330 CMOS image sensor from ON Semiconductor®. The NileCAM30 comes with 3 meters or 15 meters coaxial cable with FAKRA connector. The NileCAM30 has an S-mount (M12) lens holder which allows customers to choose and use the lens according to their application requirement.
-
Spec Sheet
Connect Tech’s Photon is a Jetson™ AI Camera Platform specifically designed to support smart camera applications. This Jetson™ platform provides PoE PD Gigabit Ethernet uplink for data and power and has various I/O connectors positioned for easy packaging into off the shelf camera housings. For applications that don’t require PoE PD ask for our lower cost Non-PoE PD options. Let Connect Tech take your Jetson Nano™ or Jetson Xavier™ NX solution to a commercially deployable platform today. NOTE: Do not use the 19V power supply from the Jetson Xavier™ NX Dev Kit with the Photon. Integrations with external storage and WiFi/Bluetooth via Intel are also available, contact [email protected] for more details. -
Spec Sheet
The JCB006 camera expansion board allows for the connection of FPD-Link III Deserializers to be connected to the Rogue or Rogue-X carriers. Power to the cameras is provided by PoC (Power over Coax) so all the data, control signals, and power are sent through a single 50 Ohm Coaxial cable. This allows for flexibility in cable routing and ease of installation in automotive applications. The main power for the board comes from the Camera Expansion Header.
