-
Spec Sheet
Forge is Connect Tech's first full-featured Carrier Board for the NVIDIA® Jetson AGX Orin™ module. This carrier board for Jetson AGX Orin™ and AGX Orin™ Industrial* is specifically designed for commercially deployable platforms and has a small footprint of 155mm x 125mm. Forge provides access to an impressive list of latest generation interfaces on the Jetson AGX Orin™ while adding additional interfaces of 3x USB 3.2, 2x GbE, Display Port and a locking 6-pin Mini-Fit Jr. power input connector. Rugged camera add-on expansion boards will also be available for use with Forge to interface directly with high-density MIPI CSI interfaces. Integrations with external storage and WiFi/Bluetooth via Intel 8265 are also available, contact [email protected] for more details. *Jetson AGX Orin™ Industrial module is supported on Rev E or later on the AGX201 -
Spec Sheet
NVIDIA® Jetson™ TX2 NX is a small, powerful computer for embedded applications and AI IoT that delivers the power of modern AI. Connect Tech is proud to provide small form factor carriers and embedded system solutions for the Jetson™ TX2 NX. To assist in your selection of our solutions, we have included accessories to match our products. These solutions have an Aluminum Alloy black finish. Readily available thermal options get you up and running fast. -
Spec Sheet
NVIDIA® Jetson™ TX2 NX is a small, powerful computer for embedded applications and AI IoT that delivers the power of modern AI. Connect Tech is proud to provide small form factor carriers and embedded system solutions for the Jetson™ TX2 NX. To assist in your selection of our solutions, we have included accessories to match our products. These solutions have an Aluminum Alloy black finish. Readily available thermal options get you up and running fast. -
Spec Sheet
Connect Tech’s Dual Port Mini PCIe GbE board is a rugged, low cost Gigabit Ethernet Mini PCIe module. This board is ideal for adding extra Ethernet capabilities to any system with minimal increase in overall system size and power consumption.
The module utilize PCIe signaling which allows it to be used in any Mini PCIe socket that supports PCIe with available Z-height. The wide operating temperature, latching Ethernet connector, and cabling solution allows these modules to be used in harsh environments.
Compatibility with a large variety of popular operating systems allows these boards to be easily integrated into a wide array of new and existing systems. -
Spec Sheet
The Photon carrier board is a Jetson™ AI Camera Platform specifically designed to support smart camera applications. This carrier provides PoE PD Gigabit Ethernet uplink for data and power and has various I/O connectors positioned for easy packaging into off the shelf camera housings. Powered by the Jetson TX2 NX module, Photon empowers fast deployment of vision-enabled AI applications requiring multiple camera streams within a compact footprint. Since Photon is compatible with the Jetson Nano, TX2 NX, and Xavier NX modules, users can seamlessly transition between the three SoM options should their AI processing requirements change. For applications that don’t require PoE PD ask for our lower cost Non-PoE PD options. While Photon is compatible with NVIDIA Jetson Nano, TX2 NX, and Xavier NX SoMs, some I/O availability will change across modules. View the Photon Compatibility Specifications for a full breakdown. NOTE: Do not use the 19V power supply from the Jetson Xavier™ NX Dev Kit with the Photon. Integrations with external storage and WiFi/Bluetooth via Intel are also available, contact [email protected] for more details. -
Spec Sheet
The Photon carrier board is a Jetson™ AI Camera Platform specifically designed to support smart camera applications. This carrier provides PoE PD Gigabit Ethernet uplink for data and power and has various I/O connectors positioned for easy packaging into off the shelf camera housings. Powered by the Jetson Xavier NX module, Photon empowers fast deployment of vision-enabled AI applications requiring multiple camera streams within a compact footprint. Since Photon is compatible with the Jetson Nano, TX2 NX, and Xavier NX modules, users can seamlessly transition between the three SoM options should their AI processing requirements change. For applications that don’t require PoE PD ask for our lower cost Non-PoE PD options. While Photon is compatible with NVIDIA Jetson Nano, TX2 NX, and Xavier NX SoMs, some I/O availability will change across modules. View the Photon Compatibility Specifications for a full breakdown. NOTE: Do not use the 19V power supply from the Jetson Xavier™ NX Dev Kit with the Photon. Integrations with external storage and WiFi/Bluetooth via Intel are also available, contact [email protected] for more details.
-
Spec Sheet
Boson for FRAMOS is an AI vision powerhouse, integrating up to four MIPI cameras within an extremely small footprint. Specifically designed for use within the FRAMOS Sensor Ecosystem, Boson maximizes sensor inputs and storage solutions for high-end vision applications. This joint product offering provides customers with a plug and play vision solution that accelerates application development time. Compatible with the Jetson Nano, TX2 NX and Xavier NX SoM’s, users can seamlessly transition between modules should their processing needs change. Boson for FRAMOS comes standard with software hooks in the board support package that automatically connects select cameras in the FRAMOS Sensor Module Ecosystem to NVIDIA’s JetPack SDK, eradicating any further development requirements from your Software team. Boson for FRAMOS has four FRAMOS PixelMate connectors directly on the carrier board. These connectors allow users to directly connect up to 4x 2-lane or 3x 4-lane MIPI CSI-2 cameras from the FRAMOS Sensor Module Ecosystem. While Boson for FRAMOS is compatible with NVIDIA Jetson Nano, TX2 NX, and Xavier NX SoMs, some I/O availability will change across modules. View the Boson for FRAMOS Compatibility Specifications for a full breakdown. Boson is available in a standard SKU (NGX007) and an alternative parts version (NGX017). These are form, fit and function equivalent. Order fulfillment ship dates may differ by part number. See more info here.Boson for FRAMOS Integration Options
Direct camera integration to the carrier board eliminates the need for an adapter board and decreases the overall hardware stack height. Customers looking for a full stack option can choose to integrate Boson for FRAMOS with their NVIDIA module of choice, available heat sinks, as well as other connectivity options.Heat Sink Options upcoming
Additional Feature Options
- WiFi/Bluetooth additions (through 2230 E-Key Expansion)
- Storage via microSD card
- NVMe storage (through M.2 M-Key (2280) NVMe PCIe x4)
-
Spec Sheet
Boson for FRAMOS is an AI vision powerhouse, integrating up to four MIPI cameras within an extremely small footprint. Specifically designed for use within the FRAMOS Sensor Ecosystem, Boson maximizes sensor inputs and storage solutions for high-end vision applications. This joint product offering provides customers with a plug and play vision solution that accelerates application development time. Compatible with the Jetson Nano, TX2 NX and Xavier NX SoMs, users can seamlessly transition between modules should their processing needs change. Boson for FRAMOS comes standard with software hooks in the board support package that automatically connects select cameras in the FRAMOS Sensor Module Ecosystem to NVIDIA’s JetPack SDK, eradicating any further development requirements from your Software team. Boson for FRAMOS has four FRAMOS PixelMate connectors directly on the carrier board. These connectors allow users to directly connect up to 4x 2-lane or 3x 4-lane MIPI CSI-2 cameras from the FRAMOS Sensor Module Ecosystem. While Boson for FRAMOS is compatible with NVIDIA Jetson Nano, TX2 NX, and Xavier NX SoMs, some I/O availability will change across modules. View the Boson for FRAMOS Compatibility Specifications for a full breakdown. Boson is available in a standard SKU (NGX007) and an alternative parts version (NGX017). These are form, fit and function equivalent. Order fulfillment ship dates may differ by part number. See more info here.
Boson for FRAMOS Integration Options
Direct camera integration to the carrier board eliminates the need for an adapter board and decreases the overall hardware stack height. Customers looking for a full stack option can choose to integrate Boson for FRAMOS with their NVIDIA module of choice, available heat sinks, as well as other connectivity options.Heat Sink Options
Additional Feature Options
- Storage via microSD card
- NVMe storage (through M.2 M-Key (2280) NVMe PCIe x4)
-
Spec Sheet
Connect Tech’s Quark Carrier is an affordable, ultra small, and feature rich carrier for AI Computing at the Edge. Just slightly larger than the Jetson SODIMM module, it's ideal for vision applications, inference, and unmanned payloads. Compatible with the Jetson Nano, TX2 NX and Xavier NX SoMs, users can seamlessly transition between modules should their processing needs change. Quark’s design includes a rich I/O set including 1x USB 3.1, 2x GbE, 2x 2-lane MIPI CSI-2, 1x USB OTG, 1x SD card slot, 3x 3.3V UART, 2 x I2C, 1x CAN 2.0b, and 1x SPI as well as positive locking IO connectors optimized for rugged environments. While Quark is compatible with NVIDIA Jetson Nano, TX2 NX, and Xavier NX SoMs, some I/O availability will change across modules. View the Quark Compatibility Specifications for a full breakdown. ** Please see PCN #: CTIU-00045 for more info regarding NGX014 ** -
Spec Sheet
Connect Tech’s Quark Carrier is an affordable, ultra small, and feature rich carrier for AI Computing at the Edge. Just slightly larger than the Jetson SODIMM module, it's ideal for vision applications, inference, and unmanned payloads. Compatible with the Jetson Nano, TX2 NX and Xavier NX SoMs, users can seamlessly transition between modules should their processing needs change. Quark’s design includes a rich I/O set including 1x USB 3.1, 2x GbE, 2x 2-lane MIPI CSI-2, 1x USB OTG, 1x SD card slot, 3x 3.3V UART, 2 x I2C, and 1x SPI as well as positive locking IO connectors optimized for rugged environments. While Quark is compatible with NVIDIA Jetson Nano, TX2 NX, and Xavier NX SoMs, some I/O availability will change across modules. View the Quark Compatibility Specifications for a full breakdown. ** Please see PCN #: CTIU-00045 for more info regarding NGX014 **
-
Spec Sheet
Connect Tech’s Quark Carrier is an affordable, ultra small, and feature rich carrier for AI Computing at the Edge. Just slightly larger than the Jetson SODIMM module, it's ideal for vision applications, inference, and unmanned payloads. Compatible with the Jetson Nano, TX2 NX and Xavier NX SoMs, users can seamlessly transition between modules should their processing needs change. Quark’s design includes a rich I/O set including 1x USB 3.1, 2x GbE, 2x 2-lane MIPI CSI-2, 1x USB OTG, 1x SD card slot, 3x 3.3V UART, 2 x I2C, 1x CAN 2.0b, and 1x SPI as well as positive locking IO connectors optimized for rugged environments. While Quark is compatible with NVIDIA Jetson Nano, TX2 NX, and Xavier NX SoMs, some I/O availability will change across modules. View the Quark Compatibility Specifications for a full breakdown. NOTE: Do not use the 19V power supply from the Jetson Xavier™ NX Dev Kit with the Quark Carrier. ** Please see PCN #: CTIU-00045 for more info regarding NGX014 **
-
Rogue Carrier Connect Tech’s Rogue is a full featured Carrier Board for the NVIDIA® Jetson AGX Xavier™ module. This carrier board for Jetson AGX Xavier is specifically designed for commercially deployable platforms, and has an extremely small footprint of 92 x 105mm. The Rogue provides access to an impressive list of latest generation interfaces on the Jetson AGX Xavier while adding additional interfaces of 3x USB 3.1, 2x GbE, 2x HDMI and a locking Mini-Fit Jr. power input connector. Rugged camera add-on expansion boards allow Rogue to interface directly with the Jetson AGX Xavier high density MIPI CSI interfaces. GMSL Camera Board The GMSL Camera Board allows up to 8 cameras to be connected to the Jetson Xavier module. Since many different types of GMSL cameras are available, the JCB002 has user selectable options to interface with either GMSL1 or GMSL2 protocols at different operating frequencies. Power to the cameras is provided by PoC (Power over Coax) so all the data, control signals, and power are sent through a single 50 Ohm Coaxial cable. This allows for flexibility in cable routing and ease of installation in automotive applications. The main power for the board comes from the Camera Expansion Header. The 12V power for the cameras is also available from the same header on the Rogue carrier. NVIDIA’s development kit does not provide voltage here, so a hot pluggable external 12V connector is available on the JCB002. The circuit will always take the external voltage if both are connected. NileCAM30 - 3.4 MP GMSL Camera Module NileCAM30 is a first GMSL camera in the NileCAM camera series. NileCAM30 is a two board solution containing the camera module and serializer board. This camera is based on AR0330 CMOS image sensor from ON Semiconductor®. The NileCAM30 comes with 3 meters or 15 meters coaxial cable with FAKRA connector. The NileCAM30 has an S-mount (M12) lens holder which allows customers to choose and use the lens according to their application requirement. -
Spec Sheet
Connect Tech’s Leopard Imaging GMSL camera board is an expansion board that allows up to 8 Leopard Imaging GMSL cameras to be connected to the Jetson AGX Xavier module. The JCB002 interfaces with GMSL2 protocols. Power to the cameras is provided by PoC (Power over Coax) so all the data, control signals, and power are sent through a single 50 Ohm Coaxial cable. This allows for flexibility in cable routing and ease of installation in automotive applications. The main power for the board comes from the Camera Expansion Header. The 12V power for the cameras is also available from the same header on the Rogue carrier. NVIDIA’s development kit does not provide voltage here, so a hot pluggable external 12V connector is available on the JCB002. The circuit will always take the external voltage if both are connected. -
Spec Sheet
Connect Tech’s e-con GMSL camera board is an expansion board that allows up to 8 e-con systems GMSL cameras to be connected to the Jetson AGX Xavier™ or the Jetson AGX Xavier™ module. The JCB002 interfaces with GMSL2 protocols. Power to the cameras is provided by PoC (Power over Coax) so all the data, control signals, and power are sent through a single 50 Ohm Coaxial cable. This allows for flexibility in cable routing and ease of installation in automotive applications. The main power for the board comes from the Camera Expansion Header. The 12V power for the cameras is also available from the same header on the Rogue carrier. NVIDIA®’s development kit does not provide voltage here, so a hot pluggable external 12V connector is available on the JCB002. The circuit will always take the external voltage if both are connected. -
Spec Sheet
The Allied Vision MIPI Camera Board is the vision solution that Jetson AGX Xavier project developers have been wishing for. Empowering rapid integration of your chosen cameras, this Camera Board allows for direct attachment of up to six MIPI sensors without the need of additional hardware components. Designed specifically to integrate up to six Allied Vision Alvium 1500 C and 1800 C sensors, this Camera Board comes supplied with all device-tree software necessary to integrate the cameras into your application - no further software development required. With seamless integration to the Connect Tech Rogue and Rogue-X Carrier Boards, users are able to transition from development to production without additional application development. Users have the option of integrating either 6x 2-lane or 4x 4-lane MIPI CSI-2 cameras from the Allied Vision Alvium 1500 C and 1800 C camera series. Browse Allied Vision Alvium 1500 C Camera Series - Click Here Browse Allied Vision Alvium 1800 C Camera Series - Click Here Additional Board Features- Suitable for Industrial Applications with extended temperature range of -40°C to +85°C (-40°F to +185°F)
- Can source +12V power from the Camera Expansion header on the Rogue and Rogue-X Carriers
-
Spec Sheet
Boson for FRAMOS is an AI vision powerhouse, integrating up to four MIPI cameras within an extremely small footprint. Specifically designed for use within the FRAMOS Sensor Ecosystem, Boson maximizes sensor inputs and storage solutions for high-end vision applications. This joint product offering provides customers with a plug and play vision solution that accelerates application development time. Compatible with the Jetson Nano, TX2 NX and Xavier NX SoM’s, users can seamlessly transition between modules should their processing needs change. Boson for FRAMOS comes standard with software hooks in the board support package that automatically connects select cameras in the FRAMOS Sensor Module Ecosystem to NVIDIA’s JetPack SDK, eradicating any further development requirements from your Software team. Boson for FRAMOS has four FRAMOS PixelMate connectors directly on the carrier board. These connectors allow users to directly connect up to 4x 2-lane or 3x 4-lane MIPI CSI-2 cameras from the FRAMOS Sensor Module Ecosystem. While Boson for FRAMOS is compatible with NVIDIA Jetson Nano, TX2 NX, and Xavier NX SoMs, some I/O availability will change across modules. View the Boson for FRAMOS Compatibility Specifications for a full breakdown. Boson is available in a standard SKU (NGX007) and an alternative parts version (NGX017). These are form, fit and function equivalent. Order fulfillment ship dates may differ by part number. See more info here.
Boson for FRAMOS Integration Options
Direct camera integration to the carrier board eliminates the need for an adapter board and decreases the overall hardware stack height. Customers looking for a full stack option can choose to integrate Boson for FRAMOS with their NVIDIA module of choice, available heat sinks, as well as other connectivity options.Heat Sink Options
- Jetson Xavier NX Thermal Transfer Plate
- Jetson Xavier NX Passive Heat Sink
- Jetson Xavier NX Active Heat Sink (2 options available)
Additional Feature Options
- WiFi/Bluetooth additions (through 2230 E-Key Expansion)
- Storage via microSD card
- NVMe storage (through M.2 M-Key (2280) NVMe PCIe x4)
-
Spec Sheet
Rudi-AGX unleashes the full potential of the NVIDIA® Jetson AGX Xavier™ module, capable of running AI programs at Maximum Performance (MAX-N) while maintaining a safe operating temperature. With an AGX Xavier SoM embedded, Rudi-AGX features a Volta GPU with 512 CUDA cores, 64 Tensor cores, and is able to achieve AI performance of 32 TOPs. Not all AGX Xavier systems are built the same. Rudi-AGX's thermal optimization allows access to the module's full AI performance capabilities, making it the AI Edge solution compute-intensive applications can rely on. Designed to accommodate sensor heavy applications, Rudi-AGX provides the ability to directly connect eight GMSL cameras, expand storage with NVMe or an SD card, and utilize a video capture card. Connectivity will not be a problem with WiFi, Bluetooth, and LTE slots, as well as two GbE ports available. This feature rich edge device also comes equipped with 6x GPIO, 4x USB 3.0, 2x UART, 2x I2C, 2x SPI, and an RS-485 connector. Rudi-AGX is ready for instant field deployment with any program developed using NVIDIA's JetPack SDK or deep learning toolkit application. Don't sacrifice AI performance due to thermal limitations. Rudi-AGX will not throttle performance within the operating temperature range when running in 30W mode with 0 CFM airflow, or with 125 CFM airflow at MAX-N. -
The NVIDIA Jetson AGX Xavier and AGX Orin Connector Saver attaches directly to AGX Xavier and AGX Orin production modules to save your connector from wear. Minimizes contact damage and protect connectors from mating and unmating wear on the module. The adapter board is an identical size to the production module as well as Connect Tech Rogue, Rogue for Orin and Forge Carriers. -
Spec Sheet
The Liquid Cooling Block is the only industrial grade water cooling thermal solution for the NVIDIA Jetson platform. Designed to attach directly to NVIDIA Jetson AGX Xavier’s TTP, the Liquid Cooling Block provides thermal relief to the module’s GPU, CPU, and memory components. Liquid Cooling is ideal for applications where sufficient airflow is unavailable, or any high powered compute system that requires noise reduction or additional cooling. The Liquid Cooling Block can be plumbed into any size of radiator, and has the flexibility of adjusting the inlet/outlet port selection. Engineered for rugged and compact applications, the cooling block features a total of 8 low profile side ports that allow for versatile connectivity options. Optimized for even flow distribution, this Liquid Cooling Block will retain performance regardless of which position the inlet and outlet streams are oriented. XHG307 - Liquid Cooling Block for NVIDIA Jetson AGX Xavier Industrial grade Liquid Cooling Block for production deployment. Comes equipped with thermal materials and mounting equipment to directly attach to the NVIDIA Jetson AGX Xavier TTP. XHG307-01 - Liquid Cooling Development Kit Designed for lab testing only, the Liquid Cooling Development Kit comes supplied with all of the materials needed for testing and verification. In addition to the Liquid Cooling Block, the Development Kit also comes equipped with tubing, reservoir, pump, fan, radiator, and coolant concentrate. As these additional components are commercial grade, they’re not suggested for production environments. Looking for a full production solution? The Liquid Cooling Block can be bundled with the Rogue or Rogue-X Carrier Board! Supplied pre-integrated with the NVIDIA Jetson AGX Xavier module and Liquid Cooling Block installed, we’ll also flash the module allowing for rapid market deployment. -
Spec Sheet
The M.2 GbE expansion board adds an additional ethernet connection to any existing carrier board through the M.2 A or E key expansion slot. Ideal for customers needing to add wired network connections within space-constrained applications, this industrial grade expansion board utilizes an Intel I210 controller for optimized performance and trusted reliability. -
Spec Sheet
The Allied Vision MIPI Camera Board is the vision solution that Jetson AGX Xavier project developers have been wishing for. Empowering rapid integration of your chosen cameras, this Camera Board allows for direct attachment of up to six MIPI sensors without the need of additional hardware components. Designed specifically to integrate up to six Allied Vision Alvium 1500 C and 1800 C sensors, this Camera Board comes supplied with all device-tree software necessary to integrate the cameras into your application - no further software development required. With seamless integration to the Connect Tech Rogue and Rogue-X Carrier Boards, users are able to transition from development to production without additional application development. Users have the option of integrating either 6x 2-lane or 4x 4-lane MIPI CSI-2 cameras from the Allied Vision Alvium 1500 C and 1800 C camera series. Browse Allied Vision Alvium 1500 C Camera Series - Click Here Browse Allied Vision Alvium 1800 C Camera Series - Click Here Additional Board Features- Suitable for Industrial Applications with extended temperature range of -40°C to +85°C (-40°F to +185°F)
- Can source +12V power from the Camera Expansion header on the Rogue and Rogue-X Carriers
-
Spec Sheet
Developed in partnership with USES Integrated Solutions, the AGX Inference Server is an extremely low wattage, high performance AI workstation powered by the NVIDIA Jetson platform. Running NVIDIA’s most powerful deep-learning software libraries, this inference server solves the challenge of deploying edge solutions at scale. The on-board 12x Jetson AGX Xavier modules are all connected by a Gigabit Ethernet fabric through a specialized Managed Ethernet Switch with 10G uplink capability (XDG201). The AGX Inferencing Server includes Out of Band Management (OOBM) via an ARM-based SMARC module to control and monitor each of the Jetson AGX Xavier modules. The OOBM not only monitors the health/boot of each module, but also remotely hard power (on/off) them individually. -
NVIDIA® Jetson Xavier™ NX delivers supercomputer performance in a tiny footprint. Since this module does not come standard with any integrated thermal solutions, all projects will require additional thermal consideration. To help get your project off the ground, we’ve developed a selection of readily available thermal options to get you up and running in record time. We have two standard Active Heat Sinks for Xavier NX projects: XHG312 – Connect Tech Active Heat Sink A high-end active heat sink that provides maximum dissipation at the lowest possible footprint. XHG314 – NVIDIA Dev Kit Active Heat Sink An active heat sink for projects with non-complex thermal and space requirements. Click on the Heat Sink Comparison tab to view the specification differences between the two heatsink options for Xavier NX projects. -
NVIDIA® Jetson Xavier™ NX is a small, powerful computer for embedded applications and AI IoT that delivers the power of modern AI. Connect Tech is proud to provide small form factor carriers and embedded system solutions for the Jetson Xavier™ NX. To assist in your selection of our solutions, we have included accessories to match our products. Readily available thermal options get you up and running fast.
