-
Spec Sheet
Developed in partnership with USES Integrated Solutions, the TX2 Inference Server is an extremely low wattage, high performance deep learning inference server powered by the NVIDIA Jetson platform. Housed in a compact 1U chassis, the TX2 Inference Server can be outfitted with up to 24x NVIDIA Jetson TX2 modules. Within the Server, three processor module carriers house up to eight Jetson TX2 modules each, and are all connected via a Gigabit Ethernet fabric through a specialized Managed Ethernet Switch developed by Connect Tech with 10G uplink capability (XDG201). The TX2 Inference Server includes Out of Band Management (OOBM) via an ARM-based SMARC module to control and monitor each of the Jetson TX2 modules. The OOBM not only monitors the health/boot of each module, but also remotely hard power (on/off) them individually. -
Spec Sheet
Connect Tech’s Sprocket Carrier for NVIDIA® Jetson™ TX2 and TX2i is designed to match the NVIDIA Jetson module form factor. The Sprocket’s design includes 1x USB OTG, 1 x4 lane MIPI CSI-2, 2x 3.3V UART, 2x I2C, and 4x GPIO. This design provides our smallest and lowest profile solution yet. The Sprocket and Jetson TX2 or TX2i stack can be mounted flat in the smallest of spaces, perfect for space constrained payloads such as that of a drone. Jump right in to your next project with your Jetson TX2 or TX2i module and Sprocket. -
Spec Sheet
Connect Tech’s Cogswell Carrier for NVIDIA® Jetson™ TX2 and TX2i is ideal for use in Gigabit Ethernet Vision applications. This product provides Gigabit Ethernet channels with built-in Power over Ethernet (PoE) sourcing capabilities, ideal for use with GigE Vision cameras. Cogswell’s design includes a total of 5 Gigabit Ethernet Ports. Four of these ports can be used for IEEE 802.3af (PoE) 15.4W power sourcing or two of these ports can be used for IEEE 802.3at (PoE+) 25.5W power sourcing. Additionally the Cogswell Carrier also enables HDMI Video, USB 3.0, USB 2.0, USB OTG, Mini-PCIe/mSATA expansion, and two RS-232 Serial Ports. -
Spec Sheet
Connect Tech’s Spacely Carrier for NVIDIA® Jetson™ TX2/TX2i is an ideal product for unmanned vehicle applications, or any application where situational awareness is critical. Spacely enables users to simultaneously connect up to 6 MIPI CSI-2 cameras as well as offering built-in expansion for a GPS/GNSS module. This carrier includes a multi-I/O port specifically designed to allow easy connection to OEM Autopilots such as the Pixhawk. Other onboard interconnects include 2x GbE, 1x HDMI, USB 3.0, USB 2.0, USB CLIENT, as well as miniPCIe and mSATA expansion. -
Spec Sheet
Connect Tech’s COM Express® Type 7 Carrier Board is based on the PICMG COM Express® COM.0 R3.0 specification. It includes dual 10-Gigabit Ethernet from SFP+ modules, 2x GbE ports, M.2 NVMe Storage, 4x USB 3.0, full and half size Mini PCIe expansion slots, 8x 3.3V buffered GPIO, and a Console connection via Micro USB. The carrier board is ideal for high-compute, enterprise level applications that have a need for a small form factor rugged solution providing access to high-end Xeon D class processors. -
Spec Sheet
The PCI-104 Qseven Carrier Board is a small embedded carrier board that allows complete integration with industry standard Qseven modules. This carrier board, which utilizes the PC/104 form factor and the PCI-104 bus, allows installation of up to 4 PCI-104 boards. The on-board connectors of the PCI-104 Qseven carrier board enable connection to SATA, USB, Ethernet, LVDS and VGA Video, and RS-232 & RS-422/485. Users can upgrade to the latest processor and memory technology with ease, while maintaining the I/O interfaces.
-
Spec Sheet
Connect Tech’s PCIe/104 Qseven Carrier Board is a small embedded carrier board that allows complete integration with any industry standard Qseven module. This carrier board utilizes the PC/104 form factor with 4 x1 PCIe lanes, and the PCIe/104 bus. The on-board connectors enable connection to SATA, USB, Ethernet, LVDS Video, VGA Video, and RS-232 & RS-422/485. Easily upgrade to the latest processor and memory technology while maintaining the I/O interfaces.
The PCIe/104 Qseven Carrier Board is ideal for a broad range of embedded applications. -
Spec Sheet
The DFlex/Fast is designed for flexibility and speed in one cost-effective package. Available in two and four port densities, the user has the advantage of using Serial Line Interface Modules to customize the DFlex/Fast to suit the various I/O electrical interface requirements of their particular application. High speed data transmissions and a number of configurable options make it the ideal connectivity solution for your data collection, control and automation needs. -
Spec Sheet
Connect Tech's DFlex is one of the most versatile serial adapters in the business. Available in two, four and eight ports, the DFlex provides a highly flexible solution for your multi-channel serial communication needs. Through the use of Serial Line Interface Modules, DFlex boards are fully user-configurable to suit the various I/O requirements of a specific application. -
Spec Sheet
The efficient Intellicon-Flex 8 provides eight ports of reliable data transfer, and the flexibility to customize your adapter to meet your specific I/O requirements. The use of our Serial Line Interface Modules technology means you can house different electrical interfaces on the same board, and allows for cost-effective field upgrades should the need arise in the future. An intelligent communications processor offloads the burden of managing communications from the main CPU, resulting in efficient I/O communications and better processing performance for the host system. -
Spec Sheet
To satisfy your unique connectivity requirements, Connect Tech designed the ACM/Flex-16 to enhance the Intellicon-NT960 and NT960/PCI serial I/O subsystems. The ACM/Flex-16 brings our versatile "Flex" technology to the NT960, offering RS-232, RS-485 and Current Loop electrical interfaces. -
Spec Sheet
The high performance Intellicon-NT960 is a RISC-based, expandable I/O subsystem rugged enough for even the most complex of application needs. In conjunction with ACM/16 and ACM/Flex-16 external modules, one Intellicon-NT960 host adapter can handle up to 128 ports. In addition, the Intellicon's processor and dual-ported RAM substantially reduce serial I/O bottlenecks on the host CPU, ensuring enhanced performance for the total system. -
Spec Sheet
The Intellicon/ISA adapter offers a reliable connectivity solution for modems, printers, barcode readers and other equipment used in industrial and office automation. Intellicon adapters are ideal solutions for multi-tasking real-time environments requiring multi-channel data collection, distribution and processing. Its intelligent communications processor offloads the burden of managing communications from the main CPU. The result is efficient I/O communications and better processing performance for the host system. -
Spec Sheet
These robust rear panel I/O options for the Titan/cPCI are available in two 3U versions: Rear I/O and Rear I/O Opto. These reliable additions allow the convenience of rear I/O connectivity for your CompactPCI application, while maintaining high performance and reliability. -
Spec Sheet
The Echo/ISA is an 8 port serial card designed for those needing continued support for ISA bus based systems. Multiple Echo boards can reside in a system to accommodate large multi-channel I/O requirements. This flexible solution enables independent configuration of each port's baud rate, parity, data and stop bits, and supports the most popular operating systems. -
Spec Sheet
The low profile BlueStorm/LP is the perfect fit for your high density chassis or low profile PC. Fully Universal PCI 2.3 compliant, this RS-422/485 adapter can be installed in either a 3.3V or 5V system, and fits into low profile and standard height PCI computers with the change of a bracket. This enables you to connect multiple devices to your system, taking full advantage of the space saving qualities of its MD1 low profile design without sacrificing performance. Data speeds up to 1.8432 Mbps (RS-422/485) ensure your data acquisition, office automation, POS, self-service kiosk or scientific/instrumentation applications communicate in a reliable, cost-effective manner. The BlueStorm/LP supports three RS-422/485 modes: full duplex (four wire) with RTS/CTS flow control, half duplex (two wire) with auto TxD echo cancellation, and multi-drop (four wire) full duplex communications of multi-drop devices. Available with surge suppression or without and DB-9 male cables, the boards can be ordered with low profile bracket, standard sized bracket or both for the ultimate flexibility. The BlueStorm/LP comes in 2, 4 and 8 port RS-422/485 models as well as 1 plus 1, 2 plus 2, and 4 plus 4 RS-232 plus RS-422/485 models. -
Spec Sheet
BlueStorm/SP RJ-11 offers hardware flexibility and adaptability for your mission critical applications. The BlueStorm/SP RJ-11 is an extension of the BlueStorm product family and is available as a standard card only. BlueStorm/SP RJ-11 offers eight ports of RS-232 serial connectivity. Each port can be configured independently for baud rate, parity, data and stop bits. Eliminate the need for external power supplies with the +5 VDC or +12 VDC of power provided on six RJ-11 ports for applications where peripherals may require it (up to 300mA total). Two DB-9 connectors are also accessible via an optional cable assembly. BlueStorm/SP RJ-11 is compatible with 3.3V and 5V PCI slots. Bi-directional data speeds up to 921.6 Kbps ensure fast data acquisition and communications. All BlueStorm/SP products are FCC certified and CE marked. -
Spec Sheet
Complex communications systems require intelligent solutions, like the robust and flexible NT960/PCI. Built around a 33 MHz Intel 80960 RISC processor with 1 MB of RAM, it substantially reduces serial I/O bottlenecks on the host CPU, resulting in improved efficiency for the total system. This subsystem is available in 16 to 128 port densities, to ensure your most demanding communications needs are satisfied. The NT960/PCI host adapter is fully compatible with all ACM/16 models currently using the ISA bus Intellicon-NT960 host adapter. The NT960/PCI can be purchased as a PCI Host Adapter replacement for an existing Intellicon-NT960 ISA bus system, or as part of a new serial I/O subsystem. The NT960/PCI provides a cost effective upgrade to the high performance PCI bus, without having to purchase all new hardware. The NT960/PCI system is also available in convenient, pre-packaged bundles, including host adapter, cable(s), Serial Line Interface Module (SLIM) and ACM external module. Click on Part Numbers for package descriptions and part numbers. -
Spec Sheet
Connect Tech's standard profile BlueStorm/SP is the ideal choice for your PCI applications. Fully PCI 2.3 compliant, the BlueStorm/SP can be installed in any 3.3V or 5V system. Available with eight ports, the BlueStorm/SP offers RS-232/422/485 connectivity and is jumper selectable on each individual port. Dependability, high speed data transfer rates and multi-strike surge suppression make these cards ideal for many environments including; industrial or office automation, POS, scientific or instrumentation applications, to name a few. All BlueStorm/SP products are FCC certified and CE marked. -
Spec Sheet
The workhorse of the Blue Heat family, the Blue Heat/PCI 20mA CL offers the ideal connectivity solution for applications in noisy environments over long cable lengths. It features eight ports of 20mA Current Loop interface, providing robust, industrial strength communications in the most demanding of environments. With support for the most popular operating systems and a variety of cabling options, the Blue Heat/PCI 20mA CL will ensure your data transfers proceed without disruption. -
Spec Sheet
Not all operating conditions are created equal. The Blue Heat/PCI Opto adds optical isolation to the reliability and performance of the standard Blue Heat/PCI serial card, so your crucial data communications can continue without a hitch. This rugged product is able to take on the most demanding of environments, such as marine, industrial, aviation and rail yard conditions, without disruption. The Blue Heat/PCI Opto adapter offers 2 and 4 asynchronous RS-232/RS-485 serial ports, individually isolated at 3.0 kV AC* for data collection devices, barcode readers, time clocks, scales and other industrial equipment requiring rugged serial communications. *Isolation ratings of 3.0 kV AC, 3.0 kV DC, and 2.1 kV AC RMS -
Spec Sheet
It's not always easy to find power when and where you need it most. High baud rates and the convenience of on-board power set the Blue Heat/PCI RJ-11 serial card apart from the rest. With rapid data transfer rates up to 1382.4 Kbps, and 8 asynchronous RS-232 ports, this is an ideal industrial strength solution for applications that require powered serial ports for magnetic card readers, barcode scanners, weigh scales, and those serial peripherals not requiring power. The Blue Heat/PCI RJ-11 is also ideal for communication and control of industrial automation equipment. -
Spec Sheet
The BlueStorm/SP Opto offers the added protection of optical isolation for your critical applications. BlueStorm/SP Opto is an extension of the BlueStorm product family and is available as a standard profile card only. Dependability, high speed data transfer rates and 3kV of optical isolation protection makes these cards ideal in environments where harsh conditions may disrupt communications. Available with four ports of RS-232/422/485 connectivity, these BlueStorm/SP Opto cards are compatible with 3.3V and 5V PCI slots. Bi-directional data speeds up to 1.8432 Mbps (RS-422/485) ensure fast data acquisition and communications. All BlueStorm/SP Opto cards are FCC certified and CE marked. -
Spec Sheet
Fast and reliable, the highly adaptable Blue Heat/PCI RS-422/485 serial card offers you a number of options for your application needs. Up to 8 RS-422/485 and RS-232 ports are available, with support for all three RS-485 modes. It provides an ideal solution for all applications requiring single node or multi-drop communications over short or long distances using PCI bus compatible computers. This high performance, multi-port serial adapter is ideal for data collection devices, POS and Kiosk equipment, and industrial automation equipment. With support for all the popular operating systems and a number of cabling options, this efficient product is a great fit in any PCI system.
