-
Unlike other Jetson modules, the NVIDIA® Jetson Xavier™ NX production module does not include an integrated thermal transfer plate. Connect Tech provides a thermal transfer plate for the Jetson Xavier NX that users can integrate into a custom chassis or to other interface material for further cooling. Readily available thermal options get you up and running fast. -
Spec Sheet
Connect Tech’s Rudi-NX is the ultimate Edge AI computing device for state-of-the-art, compute-intensive applications. Powered by NVIDIA® Jetson Xavier™ NX, it can deliver up to 21 TOPS of performance in 15W. With 384 CUDA Cores, 48 Tensor Cores, and 2 NVDLA engines, it can run multiple modern neural networks in parallel and process high-resolution data from multiple sensors simultaneously. The Rudi-NX enables multiple vision inputs including up to 4x GMSL (MIPI CSI-2) Camera inputs, 4x USB 3.0 ports and 2x Gigabit Ethernet ports. Additional connectivity via CAN, UARTs, RS-485, I2C, SPI, and GPIO. -
Unlike the NVIDIA® Jetson™ TX2 and AGX Xavier™, the NVIDIA® Jetson Nano™ production module does not include a thermal transfer plate. Connect Tech provides a thermal transfer plate that users can integrate into a custom chassis or to other interface material for further cooling of the Jetson Nano production module. Readily available thermal options get you up and running fast. -
NVIDIA® Jetson Nano™ is a small, powerful computer for embedded applications and AI IoT that delivers the power of modern AI. Connect Tech is proud to provide small form factor carriers and embedded system solutions for the Jetson Nano. To assist in your selection of our solutions, we have included accessories to match our products. Readily available thermal options get you up and running fast. -
NVIDIA® Jetson Nano™ is a small, powerful computer for embedded applications and AI IoT that delivers the power of modern AI. Connect Tech is proud to provide small form factor carriers and embedded system solutions for the Jetson Nano. To assist in your selection of our solutions, we have included accessories to match our products. Readily available thermal options get you up and running fast. -
Rogue Carrier Connect Tech’s Rogue is a full featured Carrier Board for the NVIDIA® Jetson AGX Xavier™ module. This carrier board for Jetson AGX Xavier is specifically designed for commercially deployable platforms, and has an extremely small footprint of 92 x 105mm. The Rogue provides access to an impressive list of latest generation interfaces on the Jetson AGX Xavier while adding additional interfaces of 3x USB 3.1, 2x GbE, 2x HDMI and a locking Mini-Fit Jr. power input connector. Rugged camera add-on expansion boards also allow Rogue to interface directly with the Jetson AGX Xavier high density MIPI CSI interfaces. GMSL Camera Board Connect Tech’s GMSL camera platform is an expansion board that allows up to 4 cameras to be connected to the Jetson Xavier module. Since many different types of GMSL cameras are available, the JCB002 has user selectable options to interface with either GMSL1 or GMSL2 protocols at different operating frequencies. Power to the cameras is provided by PoC (Power over Coax) so all the data, control signals, and power are sent through a single 50 Ohm Coaxial cable. This allows for flexibility in cable routing and ease of installation in automotive applications. The main power for the board comes from the Camera Expansion Header. The 12V power for the cameras is also available from the same header on the Rogue carrier. NVIDIA’s development kit does not provide voltage here, so a hot pluggable external 12V connector is available on the JCB002. The circuit will always take the external voltage if both are connected. NileCAM30 - 3.4 MP GMSL Camera Module NileCAM30 is a first GMSL camera in the NileCAM camera series. NileCAM30 is a two board solution containing the camera module and serializer board. This camera is based on AR0330 CMOS image sensor from ON Semiconductor®. The NileCAM30 comes with 3 meters or 15 meters coaxial cable with FAKRA connector. The NileCAM30 has an S-mount (M12) lens holder which allows customers to choose and use the lens according to their application requirement. -
Spec Sheet
Connect Tech’s Rogue-X is a full featured Carrier Board for the NVIDIA® Jetson AGX Xavier™ module. This carrier board for Jetson AGX Xavier is specifically designed for commercially deployable platforms, and is an ideal fit for high-end PCI Express based embedded vision and multi-camera applications. The Rogue-X allows for the Jetson AGX Xavier to interface up to two XIMEA xiX embedded vision cameras, each camera can utilize a PCIe Gen2 x4 connection. In addition, the Rogue-X can also interface to 3x USB 3.1, 2x GbE, 2x HDMI and a locking Mini-Fit Jr. power input connector. -
Spec Sheet
The Photon carrier board is a Jetson™ AI Camera Platform specifically designed to support smart camera applications. This carrier provides PoE PD Gigabit Ethernet uplink for data and power and has various I/O connectors positioned for easy packaging into off the shelf camera housings. Powered by the Jetson Nano module, Photon empowers fast deployment of vision-enabled AI applications requiring multiple camera streams within a compact footprint. Since Photon is compatible with the Jetson Nano, TX2 NX, and Xavier NX modules, users can seamlessly transition between the three SoM options should their AI processing requirements change. For applications that don’t require PoE PD ask for our lower cost Non-PoE PD options. While Photon is compatible with NVIDIA Jetson Nano, TX2 NX, and Xavier NX SoMs, some I/O availability will change across modules. View the Photon Compatibility Specifications for a full breakdown. NOTE: Do not use the 19V power supply from the Jetson Xavier™ NX Dev Kit with the Photon. Integrations with external storage and WiFi/Bluetooth via Intel are also available, contact [email protected] for more details. -
Spec Sheet
Connect Tech’s Quasar Carrier for NVIDIA® Jetson™ TX2/TX2 4GB/TX2i is an update to the Orbitty Carrier, designed to match the NVIDIA Jetson TX2/TX2 4GB/TX2i module form factor. The Quasar design includes all the same connectors as the Orbitty (1x GbE, 1x microSD, 2x 3.3V UART, I2C, and 4x GPIO,1x USB 2.0 OTG, ), with the addition of 2x USB 3.0 ports, 1x 4-lane MIPI (I-PEX), 1x CAN, an updated 1x HDMI 2.0 connector as well as a SATA 7-pin connector for storage while maintaining the 87mm x 50mm footprint. Like the Orbitty, the Quasar is ideal for robotics, unmanned applications, or any small form factor rugged environment that require the addition of MIPI, CAN, SATA or HDMI 2.0 port. Quasar is the latest addition to the Connect Tech Jetson TX2, TX2 4GB and TX2i line of products offering a wide variety of connectors in a very small and affordable package. Get up and running quickly with your Jetson module and Quasar. -
The NVIDIA® Jetson™ AGX Xavier™ is the world’s first AI computer for autonomous machines. NVIDIA Jetson AGX Xavier has an impressive 512-core Volta GPU and 64 Tensor cores with discreet dual Deep Learning Accelerator (DLA) NVDLA engines. The platform offers 20x the performance and 10x the power efficiency of the Jetson TX2. Connect Tech is proud to provide small form factor carriers and embedded system solutions for the AGX Xavier. To assist in your selection of our solutions, we have included accessories to match our products. Readily available thermal options get you up and running fast. -
Spec Sheet
Connect Tech’s GMSL camera platform is an expansion board that allows up to 8 cameras to be connected to the Jetson AGX Xavier module. Since many different types of GMSL cameras are available, the JCB002 has user selectable options to interface with either GMSL1 or GMSL2 protocols at different operating frequencies. Power to the cameras is provided by PoC (Power over Coax) so all the data, control signals, and power are sent through a single 50 Ohm Coaxial cable. This allows for flexibility in cable routing and ease of installation in automotive applications. The main power for the board comes from the Camera Expansion Header. The 12V power for the cameras is also available from the same header on the Rogue carrier. NVIDIA’s development kit does not provide voltage here, so a hot pluggable external 12V connector is available on the JCB002. The circuit will always take the external voltage if both are connected. -
The NVIDIA® Jetson™ AGX Xavier™ is the world’s first AI computer for autonomous machines. NVIDIA Jetson AGX Xavier has an impressive 512-core Volta GPU and 64 Tensor cores with discreet dual Deep Learning Accelerator (DLA) NVDLA engines. The platform offers 20x the performance and 10x the power efficiency of the Jetson TX2. Connect Tech is proud to provide small form factor carriers and embedded system solutions for the AGX Xavier. To assist in your selection of our solutions, we have included accessories to match our products. Readily available thermal options get you up and running fast. -
The NVIDIA® Jetson™ AGX Xavier™ is the world’s first AI computer for autonomous machines. NVIDIA Jetson AGX Xavier has an impressive 512-core Volta GPU and 64 Tensor cores with discreet dual Deep Learning Accelerator (DLA) NVDLA engines. The platform offers 20x the performance and 10x the power efficiency of the Jetson TX2. Connect Tech is proud to provide small form factor carriers and embedded system solutions for the AGX Xavier. To assist in your selection of our solutions, we have included accessories to match our products. Readily available thermal options get you up and running fast. -
Spec Sheet
Connect Tech’s Sentry-X Rugged Embedded System is built for the NVIDIA® Jetson AGX Xavier™, bringing out a wide assortment of I/O. Features included in this embedded system include 2x GbE, 3x USB 3.1, 2x HDMI, 2x CAN 2.0b, 1x RS-232, 1x RS-422/485, 1x UART 3.3V TTL, and 8x GPIO. Sentry-X is tested to meet MIL-STD-810G as well as DO-160G for shock and vibration along with ingress protection of IP67. The embedded system is ideal for Aerospace and Defense applications, or for any market that can benefit from the Jetson AGX Xavier’s incredible performance in a rugged enclosure. -
Spec Sheet
The Mimic Adapter from Connect Tech allows the NVIDIA® Jetson AGX Xavier™ module to be installed onto an NVIDIA Jetson TX2/TX2i carrier. The Mimic Adapter is ideal for NVIDIA Jetson users who want to easily compare performance metrics between their existing TX2/TX2i designs to the new Jetson AGX Xavier. Mimic Adapter allows users to immediately gain access to Jetson AGX Xavier's impressive 20x compute performance increase and 10x energy efficiency improvement from the Jetson TX2. This enables a giant leap forward in capabilities for autonomous machines and edge devices. -
Spec Sheet
Connect Tech’s Rogue is a full featured Carrier Board for the NVIDIA® Jetson AGX Xavier™ module. This carrier board for Jetson AGX Xavier is specifically designed for commercially deployable platforms, and has an extremely small footprint of 92 x 105mm. The Rogue provides access to an impressive list of latest generation interfaces on the Jetson AGX Xavier while adding additional interfaces of 3x USB 3.1, 2x GbE, 2x HDMI and a locking Mini-Fit Jr. power input connector. Rugged camera add-on expansion boards will also be available for use with the Rogue to interface directly with the Jetson AGX Xavier high density MIPI CSI interfaces. Integrations with external storage and WiFi/Bluetooth via Intel 8265 are also available, contact [email protected] for more details. -
Spec Sheet
The COM Express Type 7 + GPU Embedded System from Connect Tech combines Intel® Xeon® D (Server Class) and Intel® Atom™ C3000 x86 processors with high-end NVIDIA® Quadro® and Tesla® Graphics Processing Units (GPU) all into a small form factor embedded system. Choose from highest-end, highest-performance models or from low-powered models all ideal for high-end encode/decode video applications or GPGPU CUDA® processing, Deep Learning and Artificial Intelligence applications. This embedded system exposes all of the latest generation interconnect including: 10GbE and Gigabit Ethernet, USB 3.0 and 2.0, HDMI, SATA III, GPIO, I2C, M.2, miniPCIe. This embedded system uses PC-style connectors for ease of cabling and packaging. -
Spec Sheet
Connect Tech’s Cogswell Vision System is powered by NVIDIA® Jetson™. This system is pre-integrated with the NVIDIA® Jetson™ TX2 supercomputer-on-module, providing 256 CUDA® cores on NVIDIA® Pascal™ architecture. Cogswell Vision System comes in a black anodized metal enclosure and is both fanless and cable free. This system is ideal for Machine Vision applications allowing up to 5 Gigabit Ethernet cameras to be connected, 4 of which can be powered by on board Power over Ethernet. This system also comes equipped with USB 3.0, USB 2.0, USB OTG, RS-232, miniPCIe and mSATA expansion. -
Spec Sheet
Connect Tech’s OrbittyBox easily turns the Orbitty carrier into a complete packaged NVIDIA® Jetson™ TX2 system. This two-piece metal enclosure is designed to house an Orbitty Carrier, NVIDIA® Jetson™ TX2 module, and Connect Tech’s active heat sink. The enclosure is sold as an accessory, allowing it to be integrated with existing customer product. Two-piece construction for ease of installation and assembly. -
Spec Sheet
Connect Tech’s XMC to PCIe/104 Adapter Board is an engineering tool for the purpose of enabling rapid development of systems requiring the use of next generation form factor peripheral cards. This adapter supports adding VITA 42 XMC cards to a Type 1 PCIe/104 system. -
NVIDIA® Jetson™ TX2 is a supercomputer on a module that’s the size of a credit card. Its performance, power efficiency, and technology make it ideal for embedded visual computing applications. Connect Tech is proud to provide small form factor carriers and embedded system solutions for the TX2. To assist in your selection of our solutions, we have included accessories to match our products. Readily available thermal options get you up and running fast. -
NVIDIA® Jetson™ TX2 is a supercomputer on a module that’s the size of a credit card. Its performance, power efficiency, and technology make it ideal for embedded visual computing applications. Connect Tech is proud to provide small form factor carriers and embedded system solutions for the TX2, TX2 4GB, or TX2i. To assist in your selection of our solutions, we have included accessories to match our products. Readily available thermal options get you up and running fast. -
Spec Sheet
Connect Tech’s COM Express® Type 10 PC Connector Carrier is an extremely small carrier board featuring a combination of PC style connectors and locking pin header connectors. The carrier is a robust offering, with 2x USB 3.0 Type A ports, 6x USB 2.0 ports, 1x HDMI, 1x LVDS interface, and 2x GbE. The COM Express Type 10 Carrier Board provides support for the latest generation of low-powered CPUs. It is ideal for space constrained applications and supports extended temperature ranges of -40°C to +85°C. -
Spec Sheet
Connect Tech’s SMARC 2.0 carrier is an extremely small SMARC carrier board ideal for low power IoT applications as users can take advantage of the integrated on-board wireless capabilities found on the SMARC 2.0 modules. The carrier has USB 3.0, USB 2.0, 2x MIPI CSI-2 camera interfaces, HDMI outputs, and expansion via 2x miniPCIe Full Sized slot. Connect Tech’s SMARC 2.0 carrier board supports the latest generation Apollo Lake x86 low-powered processors and exposes next-generation interconnect (USB 3.0, DDI, MIPI-CSI-2). SMARC 2.0 supports an extended temperature range of -40°C to +85°C and offers a very small footprint; ideal for mobile or stationary applications.
