-
Spec Sheet
The Imaging Source FPD-Link III Camera Board allows for the connection of FPD-Link III Deserializers to be connected to the Rogue, Rogue-X, and Forge carriers. Power to the cameras is provided by PoC (Power over Coax) so all the data, control signals, and power are sent through a single 50 Ohm Coaxial cable. This allows for flexibility in cable routing and ease of installation in automotive applications. The main power for the board comes from the Camera Expansion Header. -
Spec Sheet
Connect Tech’s SSD/104 SATA is a complete rugged stackable solid state drive (SSD) and storage solution that allows up to two mSATA SSD modules to be installed into any PC/104-Plus, PCI-104, PCI/104-Express and PCIe/104 stack or embedded system. SSD/104 SATA solid state drive (SSD) and storage solution improves performance, expands storage capacity and reduces overall storage footprint in an embedded system. Designed with the latest generation of mSATA SSD modules, SSD/104 SATA solid state drive (SSD) and storage solution can be easily upgraded to accommodate future generations of mSATA modules for even greater system capacity and performance. When combined with mSATA SSD modules, SSD/104 SATA solid state storage solution directly interfaces with the standard SATA bus, which can be used as a drop-in replacement for any SATA storage device. SSD/104 SATA can also be interfaced with any single board computer or embedded system using standard 7-pin SATA. SSD/104 SATA is available as a complete storage solution with a preinstalled mSATA module, or as a separate mSATA carrier which supports any mSATA SSD module. -
Spec Sheet
Connect Tech’s SSD/104 SATA 2.5” Drive Carrier is a complete rugged stackable storage solution that allows any 2.5” SATA hard drive to be installed into any Type II PCIe/104 stack or embedded system. The SSD/104 SATA 2.5” Drive Carrier expands storage capacity and reduces overall storage footprint in an embedded system. Designed to be used with any 2.5” SATA drive, the SSD/104 SATA 2.5” Drive Carrier can be used with the latest SATA III SSD’s for high performance applications or other high capacity drives. -
Spec Sheet
Connect Tech’s Sprocket Carrier for NVIDIA® Jetson™ TX2 and TX2i is designed to match the NVIDIA Jetson module form factor. The Sprocket’s design includes 1x USB OTG, 1 x4 lane MIPI CSI-2, 2x 3.3V UART, 2x I2C, and 4x GPIO. This design provides our smallest and lowest profile solution yet. The Sprocket and Jetson TX2 or TX2i stack can be mounted flat in the smallest of spaces, perfect for space constrained payloads such as that of a drone. Jump right in to your next project with your Jetson TX2 or TX2i module and Sprocket. -
Spec Sheet
Connect Tech’s Spacely Carrier for NVIDIA® Jetson™ TX2/TX2i is an ideal product for unmanned vehicle applications, or any application where situational awareness is critical. Spacely enables users to simultaneously connect up to 6 MIPI CSI-2 cameras as well as offering built-in expansion for a GPS/GNSS module. This carrier includes a multi-I/O port specifically designed to allow easy connection to OEM Autopilots such as the Pixhawk. Other onboard interconnects include 2x GbE, 1x HDMI, USB 3.0, USB 2.0, USB CLIENT, as well as miniPCIe and mSATA expansion. -
Spec Sheet
Connect Tech’s Smart Battery Adapter allows for easy integration of a SMART battery into an existing PC/104 system. Used in combination with the Xtreme/PSU-UPS power supply, it provides a complete Power Supply solution with uninterrupted power supply and battery backup functionality. -
Spec Sheet
Connect Tech’s SMARC/SL is a super small SMARC carrier board ideal for your low power application. SMARC/SL has the ability to use both +3.3V and +1.8V SMARC Modules, a single Mini-PCIe/mSATA with External SATA switching, Gigabit Ethernet, HDMI Video, and MIPI CSI Camera interface. SMARC/SL supports an extended temperature range of -40°C to 85°C and offers a very small footprint; ideal for mobile or stationary applications. -
Spec Sheet
Connect Tech’s SMARC 2.0 carrier is an extremely small SMARC carrier board ideal for low power IoT applications as users can take advantage of the integrated on-board wireless capabilities found on the SMARC 2.0 modules. The carrier has USB 3.0, USB 2.0, 2x MIPI CSI-2 camera interfaces, HDMI outputs, and expansion via 2x miniPCIe Full Sized slot. Connect Tech’s SMARC 2.0 carrier board supports the latest generation Apollo Lake x86 low-powered processors and exposes next-generation interconnect (USB 3.0, DDI, MIPI-CSI-2). SMARC 2.0 supports an extended temperature range of -40°C to +85°C and offers a very small footprint; ideal for mobile or stationary applications. -
Spec Sheet
Sentry-X2 is a MIL-Rugged system, powered by the NVIDIA® Jetson AGX Orin™ Industrial module. Designed for mission critical applications in harsh environments, the Sentry-X2 is a MIL-SPEC certified AI system for computing at the tactical edge. The NVIDIA® Jetson AGX Orin™ Industrial is a 2048-core GPU capable of 248 TOPS, ideal for advanced AI and machine learning applications. The Sentry-X2 includes 8 GMSL2 camera inputs suitable for complex vision systems, as well as 10Gb, 2.5Gb, and 1Gb Ethernet, dual USB 3.2 ports, and a wide array of I/O options.Tested to MIL-STD specifications for shock and vibration and utilizing IP67 rated D38999 connectors for data integrity, Sentry-X2 is designed to meet the strict requirements of military, aerospace, and heavy industrial applications. -
Spec Sheet
Connect Tech’s Sentry-X Rugged Embedded System is built for the NVIDIA® Jetson AGX Xavier™, bringing out a wide assortment of I/O. Features included in this embedded system include 2x GbE, 3x USB 3.1, 2x HDMI, 2x CAN 2.0b, 1x RS-232, 1x RS-422/485, 1x UART 3.3V TTL, and 8x GPIO. Sentry-X is tested to meet MIL-STD-810G as well as DO-160G for shock and vibration along with ingress protection of IP67. The embedded system is ideal for Aerospace and Defense applications, or for any market that can benefit from the Jetson AGX Xavier’s incredible performance in a rugged enclosure. -
Spec Sheet
Connect Tech’s Rudi-NX is the ultimate Edge AI computing device for state-of-the-art, compute-intensive applications. Powered by NVIDIA® Jetson Orin™ NX, it can deliver up to 100 TOPS of performance in 15W. With 1024 CUDA Cores, 32 Tensor Cores, and 2 NVDLA v2 engines, it can run multiple modern neural networks in parallel and process high-resolution data from multiple sensors simultaneously. The Rudi-NX enables multiple vision inputs including up to 4x FPD-Link III Camera inputs, 4x USB 3.0 ports and 2x Gigabit Ethernet ports. Additional connectivity via CAN, UARTs, RS-485, I2C, SPI, and GPIO. -
Spec Sheet
Connect Tech’s Rudi-NX is the ultimate Edge AI computing device for state-of-the-art, compute-intensive applications. Powered by NVIDIA® Jetson Xavier™ NX, it can deliver up to 21 TOPS of performance in 15W. With 384 CUDA Cores, 48 Tensor Cores, and 2 NVDLA engines, it can run multiple modern neural networks in parallel and process high-resolution data from multiple sensors simultaneously. The Rudi-NX enables multiple vision inputs including up to 4x GMSL (MIPI CSI-2) Camera inputs, 4x USB 3.0 ports and 2x Gigabit Ethernet ports. Additional connectivity via CAN, UARTs, RS-485, I2C, SPI, and GPIO. -
Spec Sheet
Connect Tech’s Rudi-NX is the ultimate Edge AI computing device for state-of-the-art, compute-intensive applications. Powered by NVIDIA® Jetson Orin™ NX, it can deliver up to 100 TOPS of performance in 25W. With 1024 Cores, and 2 NVDLA V2 engines, it can run multiple modern neural networks in parallel and process high-resolution data from multiple sensors simultaneously. The Rudi-NX enables multiple vision inputs including up to 4x GMSL (MIPI CSI-2) Camera inputs, 4x USB 3.0 ports and 2x Gigabit Ethernet ports. Additional connectivity via CAN, UARTs, RS-485, I2C, SPI, and GPIO.
-
Spec Sheet
Rudi-AGX unleashes the full potential of the NVIDIA® Jetson AGX Xavier™ module, capable of running AI programs at Maximum Performance (MAX-N) while maintaining a safe operating temperature. With an AGX Xavier SoM embedded, Rudi-AGX features a Volta GPU with 512 CUDA cores, 64 Tensor cores, and is able to achieve AI performance of 32 TOPs. Not all AGX Xavier systems are built the same. Rudi-AGX's thermal optimization allows access to the module's full AI performance capabilities, making it the AI Edge solution compute-intensive applications can rely on. Designed to accommodate sensor heavy applications, Rudi-AGX provides the ability to directly connect eight GMSL cameras, expand storage with NVMe or an SD card, and utilize a video capture card. Connectivity will not be a problem with WiFi, Bluetooth, and LTE slots, as well as two GbE ports available. This feature rich edge device also comes equipped with 6x GPIO, 4x USB 3.0, 2x UART, 2x I2C, 2x SPI, and an RS-485 connector. Rudi-AGX is ready for instant field deployment with any program developed using NVIDIA's JetPack SDK or deep learning toolkit application. Don't sacrifice AI performance due to thermal limitations. Rudi-AGX will not throttle performance within the operating temperature range when running in 30W mode with 0 CFM airflow, or with 125 CFM airflow at MAX-N. -
Spec Sheet
Connect Tech’s Rudi Embedded System holds a lot of power in a small package. Rudi is pre-integrated with the NVIDIA® Jetson™ TX2 supercomputer-on-module, providing 256 CUDA® Cores on the NVIDIA Pascal™ architecture. The system has 8GB LPDDR4 memory, 4K video decode/encode, WiFi, Bluetooth, USB 3.0, CAN 2.0b, USB 2.0, and mSATA and miniPCIe expansion. Contains 1 x miniPCIe slot with PCIe and USB connectivity (options for 3G/HD-SDI video capture, analog video capture, cellular module, GPS module, additional Ethernet, ADC, DAC, additional RS-232/485 ports, additional GPIO). This small embedded system is ideal for deployable computer vision and deep learning applications. -
Spec Sheet
Connect Tech’s Rosie is a small form factor, rugged embedded system based on the NVIDIA® Jetson™ TX2/TX2i. Housed in a rugged compact enclosure with optional mounting brackets, Rosie features revolutionary NVIDIA Pascal™ architecture with 256 CUDA cores delivering over 1 TeraFLOPs of performance with a 64-bit ARM A57 CPU. Rosie’s rugged system also provides USB, HDMI, Gigabit Ethernet, WiFi, and Bluetooth capabilities all with IP68 rated Ingress protection. Custom face plates are easily accommodated using Connect Tech design services. Rosie is designed to MIL-STD 810g and DO-160G harsh environments. -
Spec Sheet
Rogue-X2 is a full-featured carrier board specifically designed for commercially deployable platforms.
The Rogue-X2 allows for the Jetson AGX Xavier to interface up to two XIMEA xiX embedded vision cameras, each camera can utilize a PCIe Gen2 x4 connection. In addition, the Rogue-X2 can also interface to 3x USB 3.1, 2x GbE, 2x HDMI and a locking Mini-Fit Jr. power input connector.
-
Spec Sheet
Connect Tech’s Rogue-X is a full featured Carrier Board for the NVIDIA® Jetson AGX Xavier™ module. This carrier board for Jetson AGX Xavier is specifically designed for commercially deployable platforms, and is an ideal fit for high-end PCI Express based embedded vision and multi-camera applications. The Rogue-X allows for the Jetson AGX Xavier to interface up to two XIMEA xiX embedded vision cameras, each camera can utilize a PCIe Gen2 x4 connection. In addition, the Rogue-X can also interface to 3x USB 3.1, 2x GbE, 2x HDMI and a locking Mini-Fit Jr. power input connector. -
Spec Sheet
Rogue-RX Carrier for Jetson AGX Orin™ is a full featured carrier board specifically designed for rugged and harsh environments. Rogue-RX Carrier for Jetson AGX Orin™ provides rugged positive locking high-speed connectors for 10GBASE-T, USB 3.2 Gen2 and HDMI, as well as a positive locking discrete wire/pin header for UART, I2C, SPI, CAN and GPIO.
Integrations with external storage and WiFi/Bluetooth via Intel 8265 are also available, contact [email protected] for more details. -
Spec Sheet
Connect Tech’s Rogue is a full featured Carrier Board for the NVIDIA® Jetson AGX Xavier™ module. This carrier board for Jetson AGX Xavier is specifically designed for commercially deployable platforms, and has an extremely small footprint of 92 x 105mm. The Rogue provides access to an impressive list of latest generation interfaces on the Jetson AGX Xavier while adding additional interfaces of 3x USB 3.1, 2x GbE, 2x HDMI and a locking Mini-Fit Jr. power input connector. Rugged camera add-on expansion boards will also be available for use with the Rogue to interface directly with the Jetson AGX Xavier high density MIPI CSI interfaces. Integrations with external storage and WiFi/Bluetooth via Intel 8265 are also available, contact [email protected] for more details. -
Spec Sheet
Rogue Carrier for Jetson AGX Orin™ is a full-featured carrier board specifically designed for commercially deployable platforms. Rogue for Jetson AGX Orin™ provides access to an impressive list of latest generation interfaces on the Jetson AGX Orin™ and AGX Orin™ Industrial* while adding additional interfaces of 2x 10GbE, 3x USB 3.1, HDMI and a locking Mini-Fit Jr. power input connector. Integrations with external storage and WiFi/Bluetooth via Intel 8265 are also available, contact [email protected] for more details. *Jetson AGX Orin™ Industrial module is supported on Rev D or later on the AGX202 -
Spec Sheet
Connect Tech’s Quasar Carrier for NVIDIA® Jetson™ TX2/TX2 4GB/TX2i is an update to the Orbitty Carrier, designed to match the NVIDIA Jetson TX2/TX2 4GB/TX2i module form factor. The Quasar design includes all the same connectors as the Orbitty (1x GbE, 1x microSD, 2x 3.3V UART, I2C, and 4x GPIO,1x USB 2.0 OTG, ), with the addition of 2x USB 3.0 ports, 1x 4-lane MIPI (I-PEX), 1x CAN, an updated 1x HDMI 2.0 connector as well as a SATA 7-pin connector for storage while maintaining the 87mm x 50mm footprint. Like the Orbitty, the Quasar is ideal for robotics, unmanned applications, or any small form factor rugged environment that require the addition of MIPI, CAN, SATA or HDMI 2.0 port. Quasar is the latest addition to the Connect Tech Jetson TX2, TX2 4GB and TX2i line of products offering a wide variety of connectors in a very small and affordable package. Get up and running quickly with your Jetson module and Quasar. -
Spec Sheet
Connect Tech’s Quark Carrier is an affordable, ultra small, and feature rich carrier for AI Computing at the Edge. Just slightly larger than the Jetson SODIMM module, it's ideal for vision applications, inference, and unmanned payloads. Compatible with the Jetson Nano, TX2 NX and Xavier NX SoMs, users can seamlessly transition between modules should their processing needs change. Quark’s design includes a rich I/O set including 1x USB 3.1, 2x GbE, 2x 2-lane MIPI CSI-2, 1x USB OTG, 1x SD card slot, 3x 3.3V UART, 2 x I2C, 1x CAN 2.0b, and 1x SPI as well as positive locking IO connectors optimized for rugged environments. While Quark is compatible with NVIDIA Jetson Nano, TX2 NX, and Xavier NX SoMs, some I/O availability will change across modules. View the Quark Compatibility Specifications for a full breakdown. ** Please see PCN #: CTIU-00045 for more info regarding NGX014 ** -
Spec Sheet
Connect Tech’s Quark Carrier is an affordable, ultra small, and feature rich carrier for AI Computing at the Edge. Just slightly larger than the Jetson SODIMM module, it's ideal for vision applications, inference, and unmanned payloads. Compatible with the Jetson Nano, TX2 NX and Xavier NX SoMs, users can seamlessly transition between modules should their processing needs change. Quark’s design includes a rich I/O set including 1x USB 3.1, 2x GbE, 2x 2-lane MIPI CSI-2, 1x USB OTG, 1x SD card slot, 3x 3.3V UART, 2 x I2C, 1x CAN 2.0b, and 1x SPI as well as positive locking IO connectors optimized for rugged environments. While Quark is compatible with NVIDIA Jetson Nano, TX2 NX, and Xavier NX SoMs, some I/O availability will change across modules. View the Quark Compatibility Specifications for a full breakdown. NOTE: Do not use the 19V power supply from the Jetson Xavier™ NX Dev Kit with the Quark Carrier. ** Please see PCN #: CTIU-00045 for more info regarding NGX014 **
